Miele wt945, WT 945 S WPS operating instructions Cleaning the filter in the water inlet

Page 42

Cleaning and care

Cleaning the filter in the water inlet

The machine has a filter to protect the water inlet valve.

The filter in the open end of the inlet hose should be checked and cleaned approx. every 6 months. It should also be checked after an interruption to the external water supply.

^First turn off the stopcock.

^Unscrew the threaded union connecting the free end of the inlet hose to the stopcock.

^Remove the rubber seal 1 from the recess.

^Using pointed pliers, take hold of the plastic filter 2 bar and remove.

^Clean the plastic filter.

Put the filter and seal back in the reverse order and reconnect the hose.

^Make sure it goes on correctly and is not cross-threaded.

^Turn on the stopcock and check that the connection is watertight. If water drips out, tighten the connection.

Never forget to put the filter back in place after cleaning.

42

Image 42

Contents Operating instructions Washer-dryer WT 945 S WPS Contents Contents Consumption data Technical data Caring for the environment Disposal of the packing materialDisposal of your old appliance or machine Technical safety Correct usageUse Using accessories Disposal of your old machineFeatures Description of the applianceDoor button Opens the drum door On / 0-OFF button Control panelStart button Additional option buttonsImportant control panel features Spin button with indicator lampsProgramme selector Washing and drying environmentally Before using for the first time Flushing out the drumWater hardness reminder Programme overview Cottons eMinimum Iron e f Delicates f Woollens gQuick wash Separate rinse StarchDrain / Spin Flushing out the drumHow to wash correctly Tumble dry How to wash correctlyImportant other care symbols IroningSeparate washing Before washingSort the laundry Select a programme Pre-wash Detergent dispensing when selecting the soak optionSoak Water plusAdding detergent At the end of a programme Adding and removing laundry Door cannot be opened, ifProgramme cycle CottonsSpecial features in the programme sequences Quick WashWater softener Adding detergentDetergent Washing with several componentsAdding fabric conditioner or liquid starch separately Fabric conditioners / starch formulationsFabric conditioners, texturisers and starch Separate starchingTips on drying Following fabrics should not be tumble driedProgramme overview Timed Drying 20 min / 30 min / 40 min / 60 min Always select the Drying / Low temp. optionSeparate drying Before dryingPreparing the laundry Programme selection Select a drying programmeDrying / Low temp After drying Washing and drying in a continuous sequence Close the drum door Open the stopcock Add detergentSelect the programme After each washing or drying programme Rinse out fluff programme Changing a programme sequence To cancel a programmeTo cancel an incorrectly selected programme To change a programme which has been lockedSafety lock Safety lockEngaging the safety lock Cleaning the detergent dispenser Cleaning and careCleaning the machine ClothClean the porthole glass Clean the siphon tubeCleaning the filter in the water inlet Problem solving guide What to do if ... ?Programme does not start DeptWash programme stops and a fault indicator light comes on During a programme Indicator lamp flashesLocked indicator lamp But the washGeneral problems or an unsatisfactory wash or drying result Option Opened during or afterDrying When drying separately Problem Possible cause Remedy Laundry is stillWhen washing Damp after a dryingMachine is not Problem Possible cause Remedy Laundry is notSpun satisfactorily Steady during a spinWhite residues which Problem Possible cause Remedy There is an excessiveBuild-up of foam Look like powderResult Problem Possible cause Remedy Liquid detergent doesNot give the required Remember to removeBlocked drain outlet Opening the drum door After sales service Appliance guaranteeInstallation and connection Front viewInstallation surface InstallationPlease note the following Removing the transit fitting Screwing out and adjusting the feet Levelling the machineInstallation and connection Inlet hose Electronic unit and washing machine housingMiele Waterproof system Drain hoseConnection to the water supply Installation and connection Maintenance and care Connection to the drainage system Drain hose connectionNon-rewireable plugs BS Electrical connection U.KConsumption data ProgrammesTechnical data Programmable functions for changing standard settings Programmable functions High water levelAdditional rinse for Cottons programme Buzzer Opening the door at high temperatures Shortening the drying time Factory settingFinal residual moisture after drying Lengthening the drying timePage Alteration rights reserved / 3404 / WT 945 S