Miele wt945, WT 945 S WPS operating instructions Programmable functions, High water level

Page 70

Programmable functions

The programmable functions can be used to tailor programmes to suit your individual requirements. Once activated the programmable functions remain in memory until they are deactivated.

High water level

This is useful where a higher quality rinse is required.

It is available for the rinses in the following wash programmes:

–COTTONS

–MINIMUM IRON

–QUICK WASH 40°C

Follow steps A to G to programme and store in memory.

The programmable functions are activated with the help of the additional option buttons and the WASHING programme selector.

Before you begin, first ensure that:

–the machine is switched off.

–the drum door is closed.

–the WASHING and DRYING programme selectors are at the Finish position.

APress the additional option buttons Soak and Pre-wash at the same time, hold pressed in and . .

B. . . switch the machine on with the I-ON /0-OFFbutton.

CThen release these buttons.

–The Soak/Pre-wash and Washing sequence indicator lamps will flash.

–A P will appear in the left of the display.

DTurn the WASHING programme selector to the Rinse out fluff position.

EThe following will appear in the display:

0= Programmable function off (de-activated)

or

i= Programmable function on (active)

Press the START button to switch between

0 to i activated or from

i to 0 deactivated.

FSwitch the machine off with the I-ON /0-OFFbutton.

The setting you have selected is now stored in memory.

GTurn the WASHING programme selector to the Finish position.

70

Image 70

Contents Operating instructions Washer-dryer WT 945 S WPS Contents Contents Consumption data Technical data Disposal of the packing material Caring for the environmentDisposal of your old appliance or machine Technical safety Correct usageUse Using accessories Disposal of your old machineFeatures Description of the applianceDoor button Opens the drum door On / 0-OFF button Control panelStart button Additional option buttonsSpin button with indicator lamps Important control panel featuresProgramme selector Washing and drying environmentally Flushing out the drum Before using for the first timeWater hardness reminder Cottons e Programme overviewMinimum Iron e f Woollens g Delicates fQuick wash Separate rinse StarchDrain / Spin Flushing out the drumHow to wash correctly Tumble dry How to wash correctlyImportant other care symbols IroningBefore washing Separate washingSort the laundry Select a programme Pre-wash Detergent dispensing when selecting the soak optionSoak Water plusAdding detergent At the end of a programme Adding and removing laundry Door cannot be opened, ifProgramme cycle CottonsSpecial features in the programme sequences Quick WashWater softener Adding detergentDetergent Washing with several componentsAdding fabric conditioner or liquid starch separately Fabric conditioners / starch formulationsFabric conditioners, texturisers and starch Separate starchingTips on drying Following fabrics should not be tumble driedProgramme overview Timed Drying 20 min / 30 min / 40 min / 60 min Always select the Drying / Low temp. optionBefore drying Separate dryingPreparing the laundry Select a drying programme Programme selectionDrying / Low temp After drying Close the drum door Open the stopcock Add detergent Washing and drying in a continuous sequenceSelect the programme After each washing or drying programme Rinse out fluff programme Changing a programme sequence To cancel a programmeTo cancel an incorrectly selected programme To change a programme which has been lockedSafety lock Safety lockEngaging the safety lock Cleaning the detergent dispenser Cleaning and careCleaning the machine ClothClean the porthole glass Clean the siphon tubeCleaning the filter in the water inlet Problem solving guide What to do if ... ?Programme does not start DeptWash programme stops and a fault indicator light comes on During a programme Indicator lamp flashesLocked indicator lamp But the washGeneral problems or an unsatisfactory wash or drying result Opened during or after OptionDrying When drying separately Problem Possible cause Remedy Laundry is stillWhen washing Damp after a dryingMachine is not Problem Possible cause Remedy Laundry is notSpun satisfactorily Steady during a spinWhite residues which Problem Possible cause Remedy There is an excessiveBuild-up of foam Look like powderResult Problem Possible cause Remedy Liquid detergent doesNot give the required Remember to removeBlocked drain outlet Opening the drum door After sales service Appliance guaranteeInstallation and connection Front viewInstallation Installation surfacePlease note the following Removing the transit fitting Screwing out and adjusting the feet Levelling the machineInstallation and connection Inlet hose Electronic unit and washing machine housingMiele Waterproof system Drain hoseConnection to the water supply Installation and connection Maintenance and care Connection to the drainage system Drain hose connectionNon-rewireable plugs BS Electrical connection U.KConsumption data ProgrammesTechnical data Programmable functions for changing standard settings Programmable functions High water levelAdditional rinse for Cottons programme Buzzer Opening the door at high temperatures Shortening the drying time Factory settingFinal residual moisture after drying Lengthening the drying timePage Alteration rights reserved / 3404 / WT 945 S