Miele WT 945 S WPS, wt945 operating instructions Additional rinse for Cottons programme

Page 71

Programmable functions

Additional rinse for the

COTTONS programme

Suitable for areas with soft water (hardness range I).

If a particularly good rinsing effect is required in an area with soft water, then the high water level can be activated in addition to the additional rinse.

Follow steps A to G to programme and store in memory.

The programmable functions are activated with the help of the additional option buttons and the WASHING programme selector.

Before you begin, first ensure that:

–the machine is switched off.

–the drum door is closed.

–the WASHING and DRYING programme selectors are at the Finish position.

APress the additional option buttons Soak and Pre-wash at the same time, hold pressed in and . .

B. . . switch the machine on with the I-ON /0-OFFbutton.

CThen release these buttons.

–The Soak/Pre-wash and Washing sequence indicator lamps will flash.

–A P will appear in the left of the display.

DTurn the WASHING programme selector to the Separate rinse position.

EThe following will appear in the display:

0= Programmable function off (de-activated)

or

i= Programmable function on (active)

Press the START button to switch between

0 to i activated or from

i to 0 deactivated.

FSwitch the machine off with the I-ON /0-OFFbutton.

The setting you have selected is now stored in memory.

GTurn the WASHING programme selector to the Finish position.

71

Image 71

Contents Operating instructions Washer-dryer WT 945 S WPS Contents Contents Consumption data Technical data Disposal of your old appliance or machine Caring for the environmentDisposal of the packing material Correct usage Technical safetyUse Disposal of your old machine Using accessoriesDescription of the appliance FeaturesAdditional option buttons Control panelStart button Door button Opens the drum door On / 0-OFF buttonProgramme selector Important control panel featuresSpin button with indicator lamps Washing and drying environmentally Water hardness reminder Before using for the first timeFlushing out the drum Minimum Iron e f Programme overviewCottons e Quick wash Delicates fWoollens g Flushing out the drum StarchDrain / Spin Separate rinseHow to wash correctly Ironing How to wash correctlyImportant other care symbols Tumble drySort the laundry Separate washingBefore washing Select a programme Water plus Detergent dispensing when selecting the soak optionSoak Pre-washAdding detergent At the end of a programme Door cannot be opened, if Adding and removing laundryCottons Programme cycleQuick Wash Special features in the programme sequencesWashing with several components Adding detergentDetergent Water softenerSeparate starching Fabric conditioners / starch formulationsFabric conditioners, texturisers and starch Adding fabric conditioner or liquid starch separatelyFollowing fabrics should not be tumble dried Tips on dryingProgramme overview Always select the Drying / Low temp. option Timed Drying 20 min / 30 min / 40 min / 60 minPreparing the laundry Separate dryingBefore drying Drying / Low temp Programme selectionSelect a drying programme After drying Select the programme Washing and drying in a continuous sequenceClose the drum door Open the stopcock Add detergent After each washing or drying programme Rinse out fluff programme To change a programme which has been locked To cancel a programmeTo cancel an incorrectly selected programme Changing a programme sequenceEngaging the safety lock Safety lockSafety lock Cloth Cleaning and careCleaning the machine Cleaning the detergent dispenserClean the siphon tube Clean the porthole glassCleaning the filter in the water inlet What to do if ... ? Problem solving guideDept Programme does not startWash programme stops and a fault indicator light comes on But the wash Indicator lamp flashesLocked indicator lamp During a programmeGeneral problems or an unsatisfactory wash or drying result Drying OptionOpened during or after Damp after a drying Problem Possible cause Remedy Laundry is stillWhen washing When drying separatelySteady during a spin Problem Possible cause Remedy Laundry is notSpun satisfactorily Machine is notLook like powder Problem Possible cause Remedy There is an excessiveBuild-up of foam White residues whichRemember to remove Problem Possible cause Remedy Liquid detergent doesNot give the required ResultBlocked drain outlet Opening the drum door Appliance guarantee After sales serviceFront view Installation and connectionPlease note the following Installation surfaceInstallation Removing the transit fitting Levelling the machine Screwing out and adjusting the feetInstallation and connection Drain hose Electronic unit and washing machine housingMiele Waterproof system Inlet hoseConnection to the water supply Installation and connection Maintenance and care Drain hose connection Connection to the drainage systemElectrical connection U.K Non-rewireable plugs BSProgrammes Consumption dataTechnical data Programmable functions for changing standard settings High water level Programmable functionsAdditional rinse for Cottons programme Buzzer Opening the door at high temperatures Lengthening the drying time Factory settingFinal residual moisture after drying Shortening the drying timePage Alteration rights reserved / 3404 / WT 945 S