Miele wt945, WT 945 S WPS Quick Wash, Special features in the programme sequences

Page 26

How to wash correctly

QUICK WASH

Main wash

Water level: low

Wash rhythm: normal

Rinses

Water level: medium

No of rinses: 2 Spinning

Rinse and interim spin2): yes

Final spin: yes

Starch

Water level: low

Wash rhythm: normal

Final spin: yes

Separate rinse

Water level: high

No of rinses: 2

Final spin: yes

Special features in the programme sequences:

Anti-crease:

At the end of every programme, with the exception of the WOOLLENS programme, the anti-crease action switches on for a maximum of 30 minutes.

1)A fourth rinse takes place automatically when:

–there is too much foam in the drum

–if a spin speed of lower than 700 rpm has been selected.

–if Without final spin has been selected

2)Rinse and interim spin:

There is a spin between the rinses.

3)Graduated rinsing:

The suds are cooled at the end of the main wash cycle by water flowing in and being pumped away at intervals. This also helps minimise creasing.

26

Image 26

Contents Operating instructions Washer-dryer WT 945 S WPS Contents Contents Consumption data Technical data Disposal of your old appliance or machine Caring for the environmentDisposal of the packing material Technical safety Correct usageUse Using accessories Disposal of your old machineFeatures Description of the applianceDoor button Opens the drum door On / 0-OFF button Control panelStart button Additional option buttonsProgramme selector Important control panel featuresSpin button with indicator lamps Washing and drying environmentally Water hardness reminder Before using for the first timeFlushing out the drum Minimum Iron e f Programme overviewCottons e Quick wash Delicates fWoollens g Separate rinse StarchDrain / Spin Flushing out the drumHow to wash correctly Tumble dry How to wash correctlyImportant other care symbols IroningSort the laundry Separate washingBefore washing Select a programme Pre-wash Detergent dispensing when selecting the soak optionSoak Water plusAdding detergent At the end of a programme Adding and removing laundry Door cannot be opened, ifProgramme cycle CottonsSpecial features in the programme sequences Quick WashWater softener Adding detergentDetergent Washing with several componentsAdding fabric conditioner or liquid starch separately Fabric conditioners / starch formulationsFabric conditioners, texturisers and starch Separate starchingTips on drying Following fabrics should not be tumble driedProgramme overview Timed Drying 20 min / 30 min / 40 min / 60 min Always select the Drying / Low temp. optionPreparing the laundry Separate dryingBefore drying Drying / Low temp Programme selectionSelect a drying programme After drying Select the programme Washing and drying in a continuous sequenceClose the drum door Open the stopcock Add detergent After each washing or drying programme Rinse out fluff programme Changing a programme sequence To cancel a programmeTo cancel an incorrectly selected programme To change a programme which has been lockedEngaging the safety lock Safety lockSafety lock Cleaning the detergent dispenser Cleaning and careCleaning the machine ClothClean the porthole glass Clean the siphon tubeCleaning the filter in the water inlet Problem solving guide What to do if ... ?Programme does not start DeptWash programme stops and a fault indicator light comes on During a programme Indicator lamp flashesLocked indicator lamp But the washGeneral problems or an unsatisfactory wash or drying result Drying OptionOpened during or after When drying separately Problem Possible cause Remedy Laundry is stillWhen washing Damp after a dryingMachine is not Problem Possible cause Remedy Laundry is notSpun satisfactorily Steady during a spinWhite residues which Problem Possible cause Remedy There is an excessiveBuild-up of foam Look like powderResult Problem Possible cause Remedy Liquid detergent doesNot give the required Remember to removeBlocked drain outlet Opening the drum door After sales service Appliance guaranteeInstallation and connection Front viewPlease note the following Installation surfaceInstallation Removing the transit fitting Screwing out and adjusting the feet Levelling the machineInstallation and connection Inlet hose Electronic unit and washing machine housingMiele Waterproof system Drain hoseConnection to the water supply Installation and connection Maintenance and care Connection to the drainage system Drain hose connectionNon-rewireable plugs BS Electrical connection U.KConsumption data ProgrammesTechnical data Programmable functions for changing standard settings Programmable functions High water levelAdditional rinse for Cottons programme Buzzer Opening the door at high temperatures Shortening the drying time Factory settingFinal residual moisture after drying Lengthening the drying timePage Alteration rights reserved / 3404 / WT 945 S