Miele W 5964 WP operating instructions Reminder to remove transit bars, Run your first programme

Page 17

Before using for the first time

4. Reminder to remove transit bars

To avoid the risk of damage, the transit bars must be removed before the machine is used for the first time. See "Installation and connection" for instructions on how to do this.

After removing the transit bars (if this has not already been done by your fitter) press the OK button.

5.Continue preparing the washing machine for use as described in the Operating instruction manual

An initial wash programme now has to be carried out in order to complete the preparation process.

Confirm the message by pressing the OK button.

Your machine is now ready for the first programme to be run.

15:00

Select programme

6. Run your first programme

The washing machine has a sensor which measures the amount of laundry in the drum. This determines the amount of detergent required which appears as a recommendation in the display. To enable the load size sensor to function correctly, you must first run a Cottons 60°C programme without any laundry and without detergent.

Open the stopcock.

Turn the programme selector to Cottons.

Cottons

60°C	1600 rpm


Duration:	2:59 h

Press the Start/Stop button.

At the end of the programme switch the machine off.

The washing machine is now ready for use.

17

Image 17

Contents Operating instructions For Washing machine W 5964 WPS Disposal of your old machine Caring for our environmentDisposal of the packing material Contents Opening the drum door in the event of a blocked drain outlet Contents Correct application Safety with children Technical safety Page Correct use Page Accessories Control panel Operating the washing machineProgramme selection examples DisplayFollowing are selected via the display Following are selected via Further programmes/SettingsOptional programme packages Preparing the washing machine Before using for the first timeWelcome screen Set the languageRun your first programme Reminder to remove transit barsCalibrating the load sensor to zero Washing environmentally and economically When drying with a tumble dryerEnergy and water consumption DetergentSort the laundry How to wash correctlyBrief instructions Select a programme Switch on the washing machineSelect an extra options Select a temperature / spin speed25% Load the drum100% Add detergentStart the programme Select Delay start if requiredProgramme end unload the drum Steam smoothing Extra optionsStains ShortFurther extras ShortExtra Final spin speed SpinningRinse and interim spin To omit the final spin Rinse holdTo select delay start Delay startTo change delay start To cancel delay startCottons Cold to 90C Max. load 8.0 kg Programme chartCottons Eco60/Eco40 Max. load 8.0 kg Minimum iron Cold to 60C Max. load 3.5 kgHygiene 30C to 90C Woollens Cold to 40CExpress Cold to 40C Freshen upDenim Cold to 60C Max. load 3.0 kg Shirts Cold to 60C Max. load 2.0 kgDark garments Cold to 60C Max. load 3.0 kg Drain / SpinOuterwear Cold to 40C Max. load 2.5 kg Trainers Cold to 40C Max pairs of shoesProofing 40C Max. load 2.5 kg Soft toys Cold to 40C Max. load 1.0 kgSilks Cold to 30C Max. load 1.0 kg First wash Cold to 40C Max. load 3.0 kgPillows Cold to 90C Pillow 80 x 80 cmGarment care label symbols Main wash Rinses Spinning Programme sequenceSpecial features in the programme sequences Changing the programme sequence Cancelling a programmeInterrupting a programme Changing a programmeTo activate the safety lock Safety lockTo deactivate the safety lock Adding or removing laundry after a programme has startedCorrect detergent DetergentDetergent Washing with several components Right amount to dispense will depend on the followingWater softeners Adding fabric conditioner or starch separately Fabric conditioners and liquid starchColour run and dye removers/ dyes Cleaning the drum Hygiene info Cleaning and careCleaning the detergent dispenser drawer External casing and fascia panelCleaning the detergent dispenser drawer housing Cleaning the filter in the water inlet Programme does not start Problem solving guideFault message Possible cause Remedy1 One of the following fault messages appears in the displayFault message Possible cause Remedy When the drum is Problem Possible cause Remedy Display indicatesFault message Load of 25% or noGeneral problems Detergent residue remain Problem Possible cause Remedy Large amountsDispenser drawer Fabric conditioner is notDoor will not open Blocked drain outlet Procedure for draining the machineOpening the drum door Future updates PC After sales serviceGuarantee Optional spare parts and accessoriesFront view Installation and connectionRear view Removing the transit bars Installation surfaceTransporting the washing machine to its installation site Installation and connection Re-fitting the transit bars Levelling the machine Screwing out and adjusting the feetPlease note Building under a continuous worktop/in a kitchen runWasher and Dryer stack Miele Waterproof system Electronic unit and washing machine housingInlet hose Drain hoseConnection to the water supply Extension hose Maintenance and careDrain hose connection Connection to the drainage systemElectrical connection U.K Non-rewireable plugs BSTechnical data Consumption data Consumption data Time Settings menuLanguage Longer pre-wash Cottons Gentle actionLock code To use the washing machine when the lock code is activatedTo activate the lock code To enter the lock codeBuzzer Temperature unitKeypad tone BrightnessNot in current prog Standby display MemoryAnti-crease CareCollection Optional accessoriesUltraColor detergent for coloured garments UltraWhite detergentLiquid detergent For Delicates Fabric conditionerPage Page Page Alteration rights reserved/0712/W 5964 WPS Nr 312 510