Changing the programme sequence
Adding or removing laundry after a programme has started
Press the Door button to open the drum door.
Add or remove items.
Close the drum door.
The programme will continue automatically.
Please note:
Once a programme has started the machine cannot recognise any adjustment to the load.
For this reason, if laundry is added or removed after the start of a programme, the machine will always complete the programme cycle assuming a full load which can lead to a change in the programme duration shown in the display.
The door cannot be opened, if:
–the suds temperature is above 55°C.
–the water is above a certain level.
–the programme has reached the Final spin stage.
If you press the Door button when the above conditions are present, the following will appear in the display:
Door locked
Safety lock
The safety lock prevents the machine from being opened or the programme cancelled during a wash programme.
To activate the safety lock
Press the Start/Stop button in after the programme has started.
Options
|
|
|
|
| Activate safety lock | ||
|
|
|
|
|
|
|
|
| Back |
| |
|
|
|
|
Press the button until Activate safety lock is highlighted and confirm by pressing the OK button.
The following will appear in the display:
Locked
The safety lock is now activated. It is deactivated automatically at the end of the programme.
To deactivate the safety lock
Press the Start/Stop button.
The following will appear in the display:
Deactivate safety lock
Press the OK button. The following will appear in the display:
Unlocked
41