Miele W 5964 WP operating instructions Technical safety

Page 8

Warning and Safety instructions

Technical safety

Before setting up the washing machine, check it for any externally visible damage.

Do not install or use a damaged washing machine.

Before connecting the washing machine, ensure that the connection data on the data plate (voltage and frequency) match the mains electricity supply. If in any doubt, consult a qualified electrician.

The electrical safety of this washing machine can only be guaranteed when correctly earthed. It is most important that this basic safety requirement is observed and regularly tested, and where there is any doubt the household wiring system should be inspected by a qualified electrician. The manufacturer cannot be held liable for the consequences of an inadequate earthing system (e.g. electric shock).

Do not connect the washing machine to the mains electricity supply by an extension lead. Extension leads do not guarantee the required safety of the machine (e.g. danger of overheating).

Faulty components must only be replaced by genuine Miele original spare parts. Only when these parts are fitted can the safety standards of the machine be guaranteed.

8

Image 8

Contents Operating instructions For Washing machine W 5964 WPS Disposal of your old machine Caring for our environmentDisposal of the packing material Contents Opening the drum door in the event of a blocked drain outlet Contents Correct application Safety with children Technical safety Page Correct use Page Accessories Operating the washing machine Control panelDisplay Programme selection examplesFollowing are selected via the display Following are selected via Further programmes/SettingsOptional programme packages Before using for the first time Preparing the washing machineWelcome screen Set the languageReminder to remove transit bars Run your first programmeCalibrating the load sensor to zero When drying with a tumble dryer Washing environmentally and economicallyEnergy and water consumption DetergentSort the laundry How to wash correctlyBrief instructions Switch on the washing machine Select a programmeSelect a temperature / spin speed Select an extra optionsLoad the drum 25%Add detergent 100%Select Delay start if required Start the programmeProgramme end unload the drum Extra options Steam smoothingStains ShortFurther extras ShortExtra Spinning Final spin speedRinse and interim spin To omit the final spin Rinse holdDelay start To select delay startTo change delay start To cancel delay startProgramme chart Cottons Cold to 90C Max. load 8.0 kgCottons Eco60/Eco40 Max. load 8.0 kg Minimum iron Cold to 60C Max. load 3.5 kgWoollens Cold to 40C Hygiene 30C to 90CExpress Cold to 40C Freshen upShirts Cold to 60C Max. load 2.0 kg Denim Cold to 60C Max. load 3.0 kgDark garments Cold to 60C Max. load 3.0 kg Drain / SpinTrainers Cold to 40C Max pairs of shoes Outerwear Cold to 40C Max. load 2.5 kgProofing 40C Max. load 2.5 kg Soft toys Cold to 40C Max. load 1.0 kgFirst wash Cold to 40C Max. load 3.0 kg Silks Cold to 30C Max. load 1.0 kgPillows Cold to 90C Pillow 80 x 80 cmGarment care label symbols Programme sequence Main wash Rinses SpinningSpecial features in the programme sequences Cancelling a programme Changing the programme sequenceInterrupting a programme Changing a programmeSafety lock To activate the safety lockTo deactivate the safety lock Adding or removing laundry after a programme has startedDetergent Correct detergentDetergent Washing with several components Right amount to dispense will depend on the followingWater softeners Adding fabric conditioner or starch separately Fabric conditioners and liquid starchColour run and dye removers/ dyes Cleaning and care Cleaning the drum Hygiene infoCleaning the detergent dispenser drawer External casing and fascia panelCleaning the detergent dispenser drawer housing Cleaning the filter in the water inlet Problem solving guide Programme does not startOne of the following fault messages appears in the display Fault message Possible cause Remedy1Fault message Possible cause Remedy Problem Possible cause Remedy Display indicates When the drum isFault message Load of 25% or noGeneral problems Problem Possible cause Remedy Large amounts Detergent residue remainDispenser drawer Fabric conditioner is notDoor will not open Procedure for draining the machine Blocked drain outletOpening the drum door After sales service Future updates PCGuarantee Optional spare parts and accessoriesInstallation and connection Front viewRear view Removing the transit bars Installation surfaceTransporting the washing machine to its installation site Installation and connection Re-fitting the transit bars Screwing out and adjusting the feet Levelling the machinePlease note Building under a continuous worktop/in a kitchen runWasher and Dryer stack Electronic unit and washing machine housing Miele Waterproof systemInlet hose Drain hoseConnection to the water supply Maintenance and care Extension hoseConnection to the drainage system Drain hose connectionNon-rewireable plugs BS Electrical connection U.KTechnical data Consumption data Consumption data Time Settings menuLanguage Gentle action Longer pre-wash CottonsTo use the washing machine when the lock code is activated Lock codeTo activate the lock code To enter the lock codeTemperature unit BuzzerKeypad tone BrightnessNot in current prog Standby display MemoryAnti-crease Optional accessories CareCollectionUltraWhite detergent UltraColor detergent for coloured garmentsLiquid detergent For Delicates Fabric conditionerPage Page Page Alteration rights reserved/0712/W 5964 WPS Nr 312 510