Miele W 5964 WP operating instructions Electrical connection U.K, Non-rewireable plugs BS

Page 70

Installation and connection

Electrical connection U.K.

All electrical work should be carried out by a suitably qualified and competent person, in strict accordance with current national and local safety regulations (BS 7671 in the UK).

Ensure power is not supplied to the appliance until after installation work has been carried out.

The appliance is supplied with a mains cable with moulded plug ready for connection to a 230-240V mains supply.

Please ensure the connection data quoted on the data plate match the household mains supply.

Connection should be made via a suitable switched socket which is easily accessible after installation.

For extra safety it is advisable to protect the machine with a suitable residual current device (RCD). Contact a qualified electrician for advice.

Do not connect via an extension lead. Extension leads do not guarantee the required safety of the appliance (e.g. danger of overheating).

Non-rewireable plugs BS 1363

The fuse cover must be refitted when changing the fuse, and if the fuse cover is lost, the plug must not be used until a suitable replacement is obtained. The colour of the correct replacement cover is that of the coloured insert in the base of the plug, or the colour that is embossed in words on the base of the plug (as applicable to the design of plug fitted).

Replacement fuses should be ASTA approved to BS 1362 and have the correct rating. Replacement fuses and fuse covers may be purchased from your local electrical supplier.

WARNING: THIS APPLIANCE MUST BE EARTHED

70

Image 70

Contents Operating instructions For Washing machine W 5964 WPS Disposal of the packing material Caring for our environmentDisposal of your old machine Contents Opening the drum door in the event of a blocked drain outlet Contents Correct application Safety with children Technical safety Page Correct use Page Accessories Operating the washing machine Control panelDisplay Programme selection examplesOptional programme packages Following are selected via Further programmes/SettingsFollowing are selected via the display Welcome screen Before using for the first timePreparing the washing machine Set the languageReminder to remove transit bars Run your first programmeCalibrating the load sensor to zero Energy and water consumption When drying with a tumble dryerWashing environmentally and economically DetergentBrief instructions How to wash correctlySort the laundry Switch on the washing machine Select a programmeSelect a temperature / spin speed Select an extra optionsLoad the drum 25%Add detergent 100%Select Delay start if required Start the programmeProgramme end unload the drum Stains Extra optionsSteam smoothing ShortFurther extras ShortExtra Rinse and interim spin SpinningFinal spin speed To omit the final spin Rinse holdTo change delay start Delay startTo select delay start To cancel delay startCottons Eco60/Eco40 Max. load 8.0 kg Programme chartCottons Cold to 90C Max. load 8.0 kg Minimum iron Cold to 60C Max. load 3.5 kgExpress Cold to 40C Woollens Cold to 40CHygiene 30C to 90C Freshen upDark garments Cold to 60C Max. load 3.0 kg Shirts Cold to 60C Max. load 2.0 kgDenim Cold to 60C Max. load 3.0 kg Drain / SpinProofing 40C Max. load 2.5 kg Trainers Cold to 40C Max pairs of shoesOuterwear Cold to 40C Max. load 2.5 kg Soft toys Cold to 40C Max. load 1.0 kgPillows Cold to 90C First wash Cold to 40C Max. load 3.0 kgSilks Cold to 30C Max. load 1.0 kg Pillow 80 x 80 cmGarment care label symbols Programme sequence Main wash Rinses SpinningSpecial features in the programme sequences Interrupting a programme Cancelling a programmeChanging the programme sequence Changing a programmeTo deactivate the safety lock Safety lockTo activate the safety lock Adding or removing laundry after a programme has startedDetergent Correct detergentDetergent Water softeners Right amount to dispense will depend on the followingWashing with several components Colour run and dye removers/ dyes Fabric conditioners and liquid starchAdding fabric conditioner or starch separately Cleaning the detergent dispenser drawer Cleaning and careCleaning the drum Hygiene info External casing and fascia panelCleaning the detergent dispenser drawer housing Cleaning the filter in the water inlet Problem solving guide Programme does not startOne of the following fault messages appears in the display Fault message Possible cause Remedy1Fault message Possible cause Remedy Fault message Problem Possible cause Remedy Display indicatesWhen the drum is Load of 25% or noGeneral problems Dispenser drawer Problem Possible cause Remedy Large amountsDetergent residue remain Fabric conditioner is notDoor will not open Procedure for draining the machine Blocked drain outletOpening the drum door Guarantee After sales serviceFuture updates PC Optional spare parts and accessoriesInstallation and connection Front viewRear view Transporting the washing machine to its installation site Installation surfaceRemoving the transit bars Installation and connection Re-fitting the transit bars Screwing out and adjusting the feet Levelling the machineWasher and Dryer stack Building under a continuous worktop/in a kitchen runPlease note Inlet hose Electronic unit and washing machine housingMiele Waterproof system Drain hose Connection to the water supply Maintenance and care Extension hoseConnection to the drainage system Drain hose connectionNon-rewireable plugs BS Electrical connection U.KTechnical data Consumption data Consumption data Language Settings menuTime Gentle action Longer pre-wash CottonsTo activate the lock code To use the washing machine when the lock code is activatedLock code To enter the lock codeKeypad tone Temperature unitBuzzer BrightnessAnti-crease Standby display MemoryNot in current prog Optional accessories CareCollectionLiquid detergent For Delicates UltraWhite detergentUltraColor detergent for coloured garments Fabric conditionerPage Page Page Alteration rights reserved/0712/W 5964 WPS Nr 312 510