Miele W 5964 WP Building under a continuous worktop/in a kitchen run, Washer and Dryer stack

Page 65

Installation and connection

The fitting of building-under kits* and stacking kits* must only be undertaken by qualified and competent persons, in accordance with the instructions supplied with the kit.

Building under a continuous worktop/in a kitchen run

If you wish to push your machine under a worktop and there is space to do this without removing the lid, the conversion kit is not necessary. Otherwise the conversion kit is essential.

–A special building-under conversion kit* is required.

To ensure electrical safety, the washing machine lid must be replaced by the cover plate supplied with the conversion kit.

–For installation under a work surface 900/910 mm from the floor, a raising kit* is required.

–Connections for electricity, water and drainage should be installed in such a way that they remain accessible when the machine is in place.

Fitting instructions are supplied with the conversion kit.

All parts marked* are available from your Dealer, the Miele Spare Parts Department or via the internet at www.miele-shop.com.

Washer and Dryer stack

A Miele tumble dryer can be stacked with the washing machine. A "WTV" stacking kit* is necessary.

Please note:

aSafety distance to wall: at least 2 cm

bHeight:

Stacking kit with pull-out shelf: approx. 169 cm

Stacking kit without pull-out shelf: approx. 170 cm

65

Image 65

Contents Operating instructions For Washing machine W 5964 WPS Disposal of your old machine Caring for our environmentDisposal of the packing material Contents Opening the drum door in the event of a blocked drain outlet Contents Correct application Safety with children Technical safety Page Correct use Page Accessories Control panel Operating the washing machineProgramme selection examples DisplayFollowing are selected via the display Following are selected via Further programmes/SettingsOptional programme packages Preparing the washing machine Before using for the first timeWelcome screen Set the languageRun your first programme Reminder to remove transit barsCalibrating the load sensor to zero Washing environmentally and economically When drying with a tumble dryerEnergy and water consumption DetergentSort the laundry How to wash correctlyBrief instructions Select a programme Switch on the washing machineSelect an extra options Select a temperature / spin speed25% Load the drum100% Add detergentStart the programme Select Delay start if requiredProgramme end unload the drum Steam smoothing Extra optionsStains ShortFurther extras ShortExtra Final spin speed SpinningRinse and interim spin To omit the final spin Rinse holdTo select delay start Delay startTo change delay start To cancel delay startCottons Cold to 90C Max. load 8.0 kg Programme chartCottons Eco60/Eco40 Max. load 8.0 kg Minimum iron Cold to 60C Max. load 3.5 kgHygiene 30C to 90C Woollens Cold to 40CExpress Cold to 40C Freshen upDenim Cold to 60C Max. load 3.0 kg Shirts Cold to 60C Max. load 2.0 kgDark garments Cold to 60C Max. load 3.0 kg Drain / SpinOuterwear Cold to 40C Max. load 2.5 kg Trainers Cold to 40C Max pairs of shoesProofing 40C Max. load 2.5 kg Soft toys Cold to 40C Max. load 1.0 kgSilks Cold to 30C Max. load 1.0 kg First wash Cold to 40C Max. load 3.0 kgPillows Cold to 90C Pillow 80 x 80 cmGarment care label symbols Main wash Rinses Spinning Programme sequenceSpecial features in the programme sequences Changing the programme sequence Cancelling a programmeInterrupting a programme Changing a programmeTo activate the safety lock Safety lockTo deactivate the safety lock Adding or removing laundry after a programme has startedCorrect detergent DetergentDetergent Washing with several components Right amount to dispense will depend on the followingWater softeners Adding fabric conditioner or starch separately Fabric conditioners and liquid starchColour run and dye removers/ dyes Cleaning the drum Hygiene info Cleaning and careCleaning the detergent dispenser drawer External casing and fascia panelCleaning the detergent dispenser drawer housing Cleaning the filter in the water inlet Programme does not start Problem solving guideFault message Possible cause Remedy1 One of the following fault messages appears in the displayFault message Possible cause Remedy When the drum is Problem Possible cause Remedy Display indicatesFault message Load of 25% or noGeneral problems Detergent residue remain Problem Possible cause Remedy Large amountsDispenser drawer Fabric conditioner is notDoor will not open Blocked drain outlet Procedure for draining the machineOpening the drum door Future updates PC After sales serviceGuarantee Optional spare parts and accessoriesFront view Installation and connectionRear view Removing the transit bars Installation surfaceTransporting the washing machine to its installation site Installation and connection Re-fitting the transit bars Levelling the machine Screwing out and adjusting the feetPlease note Building under a continuous worktop/in a kitchen runWasher and Dryer stack Miele Waterproof system Electronic unit and washing machine housingInlet hose Drain hoseConnection to the water supply Extension hose Maintenance and careDrain hose connection Connection to the drainage systemElectrical connection U.K Non-rewireable plugs BSTechnical data Consumption data Consumption data Time Settings menuLanguage Longer pre-wash Cottons Gentle actionLock code To use the washing machine when the lock code is activatedTo activate the lock code To enter the lock codeBuzzer Temperature unitKeypad tone BrightnessNot in current prog Standby display MemoryAnti-crease CareCollection Optional accessoriesUltraColor detergent for coloured garments UltraWhite detergentLiquid detergent For Delicates Fabric conditionerPage Page Page Alteration rights reserved/0712/W 5964 WPS Nr 312 510