Delay start
With delay start you can choose when you want the programme to end. The start of a programme can be delayed from 15 minutes up to a maximum of 24 hours, allowing you to make use of
The current time of day needs to have been set for delay start to work correctly.
To select delay start
Select the programme you want and then press the button.
The display shows:
Delay start | 8:20 |
|
|
Start time | 8:20 |
|
|
|
|
Finish time | 11:19 |
|
|
Press the button to select the time you want the programme to end at.
The first press on the button will adjust the programme end time to the next 15, 30, 45 minutes or full hour. Each subsequent press on the button will delay the programme end time by 15 minutes.
Delay start | 8:20 |
|
|
Start time | 15:01 |
|
|
Finish time | 18:00 |
|
|
Confirm your selection by pressing the OK button.
Press the Start/Stop button.
The display will show the hours and minutes remaining until the start of the programme.
To change delay start
You can select a later or earlier programme end time subsequently, if you wish.
Press the button.
Use the or button to change the programme end time.
Confirm your selection by pressing the OK button.
To cancel delay start
Press the Start/Stop button.
The following will appear in the display:
Options
|
|
|
|
| Cancel delay start | ||
|
|
|
|
| Activate safety lock |
| |
|
| ||
|
|
|
|
Confirm your selection by pressing the OK button.
Now you can select a different programme, or
press the Start/Stop button to start the programme straight away.
The actual load size can only be determined accurately by the machine once the programme has started. The programme end time may, therefore, be a bit later or earlier than first indicated.
31