Miele T 8822 C Electronic system lock, To activate the lock, To deactivate the lock

Page 20

Electronic system lock

The system lock prevents the dryer being used without your knowledge.

It can be activated if wished.

The dryer's electronics are then locked. The dryer can still be switched on but a programme cannot be started.

If an attempt is made to start a programme, the indicator light for the Low temperature button will come on and a key symbol 0-§ will appear in the display.

The door is not locked and can be opened at any time.

To activate the lock

Before you begin, first ensure that:

The tumble dryer is switched off.

The door is closed.

￿Press the Low temperature button and keep it pressed in whilst carrying out steps ￿ to ￿.

￿Press the I-On/0-Off button in.

The Automatic plus indicator light will come on.

￿Slowly turn the programme selector three positions stage by stage in a clockwise direction.

Each of the three programme indicator lights must come on one after the other.

￿Now slowly turn the programme selector six positions stage by stage in an anti-clockwise direction.

Each of the six programme indicator lights must come on one after the other.

The indicator light for the Low temperature button will flash, and a key symbol 0-§ will appear in the display.

￿Release the Low temperature button. The electronics have now been locked.

￿Switch the dryer off.

To deactivate the lock

Before you begin, first ensure that:

The tumble dryer is switched off.

The door is closed.

￿The procedure is the same as for activating the lock. Carry out steps ￿ to ￿ as described previously.

At step ￿ the indicator light for the Low temperature button will stop flashing and the key symbol 0-§ will go out.

The electronics are no longer locked.

20

Image 20
Contents Operating instructions For condenser tumble dryer T 8822 C Caring for the environment Disposal of the packing materialDisposal of your old appliance Energy saving tipsContents Contents Safety with children Correct applicationTechnical safety Correct use Accessories Operating the tumble dryer Control panelFollowing are also selected via the display Programme duration / Estimated time remainingDisplay shows Garment care label symbols Tips on dryingDrying IroningHow to dry correctly Brief instructionsSort the laundry Turn on the tumble dryerDrying level programmes Select any Extra options / Delay startSelect a programme Before the end of a programme Remove the laundry when the programme has finishedStart the programme Extra options Extra options / Delay startDelay start Programme chart Cottons Max. load 7 kg Extra dry, NormalHand iron**, Machine iron Delicates Max. load 2.5 kg Normal, Hand iron Woollens handcare Max. load 2 kg Proofing Max. load 2.5 kg Normal Only use proofing agents which are stated by Manufacturer as being suitable for use on membraneShirts Max. load 2 kg Normal, Hand iron Cool air Max. load 7 kgWarm air Max. load 7 kg Gentle smoothing Max. load 1 kgAltering Delay start Changing the programme sequenceOnce a programme has started Adding or removing laundry after a programme has startedTo deactivate the lock Electronic system lockTo activate the lock Cleaning and care Emptying the condensed water containerCleaning the fluff filters Cleaning them whilst dryCleaning them with water Cleaning the tumble dryer Cleaning the condenser unit Removing the condenser unitChecking the condenser unit Checking and cleaning the condenser unit housing Problem solving guide Check and fault messagesProblem Possible cause Remedy Airways indicatorTo switch off the indicator Buzzer sounds To switch off the indicator LightIndicators for these Cool air programmesWill not start Programmes do notAn unsatisfactory drying result Other problems Problem Possible cause Remedy Drying processEven switches off Goes on too long orProblem Possible cause Remedy Water leaks from Been cleanedPower cut Dryer afterChanging the lamp After Sales service Future updates PCAppliance guarantee Optional accessoriesInstallation Front viewInstallation site Transporting the dryer to its installation siteRear view Replacing the lidBefore moving the tumble dryer again e.g. when moving house Levelling the applianceRoom ventilation Washer-dryer stackArranging the drain hose External condensed water outletGeneral notes Installation conditions requiring a non-return valve External drainage via a sink or gullyInstallation Electrical connection U.K Non-rewireable plugs BSElectrical connection Consumption data Woollens handcareTechnical data Programmable functions Extending the range of the drying levelsHours anti-crease Anti-crease settingAnti-crease deactivated Hour anti-crease Altering the volume of the buzzer Normal buzzer Default setting Loud buzzerMemory deactivated default setting Memory activated Memory functionCooling down time will be ten minutes longer Extending the cooling down timeFollow steps to to programme and store in memory Clean out airways indicator Default settingKeypad tone Adjusting the dryers electronics for very soft water Default setting Adjusted for very soft waterPage Page Page Alteration rights reserved/1409 Nr 483 560
Related manuals
Manual 64 pages 59 Kb