Miele T 8822 C Problem Possible cause Remedy Water leaks from, Dryer after, Condenser unit has

Page 33

Problem solving guide

Problem

Possible cause

Remedy

Water leaks from the

– The inner cover of the

Ensure that the

dryer after the

condenser unit has not

 

condenser unit is

condenser unit has

been locked properly

 

positioned correctly

been cleaned.

and/or the condenser

 

and lock the inner

 

unit has not been

 

cover.

 

positioned correctly.

Check the rubber

 

– Fluff has collected in

 

seals.

 

the condenser unit

Use a cloth to remove

 

housing.

 

any visible fluff from the

 

 

 

inside of the condenser

 

 

 

unit housing.

The programme does

No obvious cause.

Is the dryer switched

not start.

 

 

on?

 

 

Is the plug correctly

 

 

 

inserted into the socket

 

 

 

and switched on?

 

 

Is the door closed

 

 

 

properly?

 

 

Has the fuse or circuit

 

 

 

breaker tripped?

Power cut.

A programme which was running previously will

 

continue automatically when power is restored to the

 

tumble dryer as long as the Cooling down phase had

 

not been reached.

 

 

The interior drum

The lighting switches off

Switch the dryer off

lighting does not come

automatically (to save

 

and then on again.

on.

energy).

If the lamp needs to be

 

 

 

replaced, follow the

 

 

 

instructions in

 

 

 

"Changing the lamp".

33

Image 33
Contents Operating instructions For condenser tumble dryer T 8822 C Disposal of the packing material Caring for the environmentDisposal of your old appliance Energy saving tipsContents Contents Correct application Safety with childrenTechnical safety Correct use Accessories Control panel Operating the tumble dryerProgramme duration / Estimated time remaining Display showsFollowing are also selected via the display Tips on drying Garment care label symbolsDrying IroningBrief instructions How to dry correctlySort the laundry Turn on the tumble dryerSelect any Extra options / Delay start Select a programmeDrying level programmes Remove the laundry when the programme has finished Start the programmeBefore the end of a programme Extra options / Delay start Delay startExtra options Cottons Max. load 7 kg Extra dry, Normal Programme chartHand iron**, Machine iron Delicates Max. load 2.5 kg Normal, Hand ironProofing Max. load 2.5 kg Normal Woollens handcare Max. load 2 kgOnly use proofing agents which are stated by Manufacturer as being suitable for use on membraneCool air Max. load 7 kg Shirts Max. load 2 kg Normal, Hand ironWarm air Max. load 7 kg Gentle smoothing Max. load 1 kgChanging the programme sequence Altering Delay startOnce a programme has started Adding or removing laundry after a programme has startedElectronic system lock To activate the lockTo deactivate the lock Emptying the condensed water container Cleaning and careCleaning them whilst dry Cleaning the fluff filtersCleaning them with water Cleaning the tumble dryer Removing the condenser unit Cleaning the condenser unitChecking the condenser unit Checking and cleaning the condenser unit housing Check and fault messages Problem solving guideAirways indicator Problem Possible cause RemedyTo switch off the indicator Buzzer sounds To switch off the indicator LightCool air programmes Indicators for theseWill not start Programmes do notAn unsatisfactory drying result Problem Possible cause Remedy Drying process Other problemsEven switches off Goes on too long orBeen cleaned Problem Possible cause Remedy Water leaks fromPower cut Dryer afterChanging the lamp Future updates PC After Sales serviceAppliance guarantee Optional accessoriesFront view InstallationTransporting the dryer to its installation site Installation siteRear view Replacing the lidLevelling the appliance Before moving the tumble dryer again e.g. when moving houseRoom ventilation Washer-dryer stackExternal condensed water outlet General notesArranging the drain hose External drainage via a sink or gully Installation conditions requiring a non-return valveInstallation Non-rewireable plugs BS Electrical connectionElectrical connection U.K Woollens handcare Consumption dataTechnical data Extending the range of the drying levels Programmable functionsAnti-crease setting Anti-crease deactivated Hour anti-creaseHours anti-crease Normal buzzer Default setting Loud buzzer Altering the volume of the buzzerMemory function Memory deactivated default setting Memory activatedExtending the cooling down time Follow steps to to programme and store in memoryCooling down time will be ten minutes longer Default setting Clean out airways indicatorKeypad tone Default setting Adjusted for very soft water Adjusting the dryers electronics for very soft waterPage Page Page Alteration rights reserved/1409 Nr 483 560
Related manuals
Manual 64 pages 59 Kb