Programmable functions
Extending the cooling down time
The cooling down phase which takes place before the end of a programme can be lengthened if required. This makes the garments easier to handle.
The cooling down time
–can be extended by 5 minutes or 10 minutes.
–can only be extended for programmes with drying levels.
Follow steps to to programme and store in memory.
The programmable functions are activated with the buttons.
Before you begin, first ensure that:
–The tumble dryer is switched off.
–The door is closed.
Press the Start/Stop button and keep it pressed in whilst carrying out steps
Press the button in.
Wait until the indicator light for the Start/ Stop button lights up constantly . . .
. . . and then release the Start/Stop button.
Press the Low temperature button four times.
–The Low temperature indicator light will briefly flash on and off seven times.
–P and 0 (default setting) will flash alternately in the display.
The number which appears alternately in the display with P means:
0Default setting
IThe cooling down time will be five minutes longer.
(The Automatic plus indicator light will also flash once).
2The cooling down time will be ten minutes longer.
(The Automatic plus indicator light will also flash twice).
Pressing the Start/Stop button switches from one number to another.
Switch the dryer off with the button.
The setting you have selected is now stored in memory. You can change it again at any time.
49