Miele T 8822 C operating instructions Operating the tumble dryer, Control panel

Page 9

Operating the tumble dryer

Control panel

￿Low temperature button

Delicate fabrics are dried at a lower temperature.

￿Drying level button

with indicator lights to show the drying level selected.

￿Display

See next page.

￿Delay start button This button is used for:

-Delaying the start of a programme

-Selecting the duration of the timed drying Warm air and Cool air programmes

￿Buzzer button

An audible tone sounds at the end of the programme.

￿Perfect Dry indicator

For all drying level programmes. See next page.

￿Check lights

For a description of these, see "Problem solving guide" / "After sales service".

￿Start/Stop button

For starting or cancelling a programme.

The button flashes while a programme is being selected and then lights up constantly when the programme has started.

￿Programme selector

with indicator lights to show the programme selected.

￿Door button

Pressing this button will open the door even when the dryer is switched off at the mains.

￿On/Off button ￿￿

For switching the dryer on and off.

9

Image 9
Contents Operating instructions For condenser tumble dryer T 8822 C Disposal of the packing material Caring for the environmentDisposal of your old appliance Energy saving tipsContents Contents Correct application Safety with childrenTechnical safety Correct use Accessories Control panel Operating the tumble dryerProgramme duration / Estimated time remaining Display showsFollowing are also selected via the display Tips on drying Garment care label symbolsDrying IroningBrief instructions How to dry correctlySort the laundry Turn on the tumble dryerSelect any Extra options / Delay start Select a programmeDrying level programmes Remove the laundry when the programme has finished Start the programmeBefore the end of a programme Extra options / Delay start Delay startExtra options Cottons Max. load 7 kg Extra dry, Normal Programme chartHand iron**, Machine iron Delicates Max. load 2.5 kg Normal, Hand ironProofing Max. load 2.5 kg Normal Woollens handcare Max. load 2 kgOnly use proofing agents which are stated by Manufacturer as being suitable for use on membraneCool air Max. load 7 kg Shirts Max. load 2 kg Normal, Hand ironWarm air Max. load 7 kg Gentle smoothing Max. load 1 kgChanging the programme sequence Altering Delay startOnce a programme has started Adding or removing laundry after a programme has startedElectronic system lock To activate the lockTo deactivate the lock Emptying the condensed water container Cleaning and careCleaning them whilst dry Cleaning the fluff filtersCleaning them with water Cleaning the tumble dryer Removing the condenser unit Cleaning the condenser unitChecking the condenser unit Checking and cleaning the condenser unit housing Check and fault messages Problem solving guideAirways indicator Problem Possible cause RemedyTo switch off the indicator Buzzer sounds To switch off the indicator LightCool air programmes Indicators for theseWill not start Programmes do notAn unsatisfactory drying result Problem Possible cause Remedy Drying process Other problemsEven switches off Goes on too long orBeen cleaned Problem Possible cause Remedy Water leaks fromPower cut Dryer afterChanging the lamp Future updates PC After Sales serviceAppliance guarantee Optional accessoriesFront view InstallationTransporting the dryer to its installation site Installation siteRear view Replacing the lidLevelling the appliance Before moving the tumble dryer again e.g. when moving houseRoom ventilation Washer-dryer stackExternal condensed water outlet General notesArranging the drain hose External drainage via a sink or gully Installation conditions requiring a non-return valveInstallation Non-rewireable plugs BS Electrical connectionElectrical connection U.K Woollens handcare Consumption dataTechnical data Extending the range of the drying levels Programmable functionsAnti-crease setting Anti-crease deactivated Hour anti-creaseHours anti-crease Normal buzzer Default setting Loud buzzer Altering the volume of the buzzerMemory function Memory deactivated default setting Memory activatedExtending the cooling down time Follow steps to to programme and store in memoryCooling down time will be ten minutes longer Default setting Clean out airways indicatorKeypad tone Default setting Adjusted for very soft water Adjusting the dryers electronics for very soft waterPage Page Page Alteration rights reserved/1409 Nr 483 560
Related manuals
Manual 64 pages 59 Kb