Programmable functions
Clean out airways indicator
Fluff should be removed after drying. The Clean out airways indicator will remind you to clean the filters when a certain amount of fluff has collected in the filters. You can decide at what level of fluff this reminder should be given.
You will have an idea of which of the four options to select after a few drying programmes.
Follow steps to to programme and store in memory.
Before you begin, first ensure that:
–The tumble dryer is switched off.
–The door is closed.
Press the Start/Stop button and keep it pressed in whilst carrying out steps
Press the button in.
Wait until the indicator light for the Start/ Stop button lights up constantly . . .
. . . and then release the Start/Stop button.
Press the Low temperature button five times.
–The Low temperature indicator light will flash on and off once slowly.
–P and 2 (default setting) will flash alternately in the display.
The number which appears alternately in the display with P means:
0the Clean out airways indicator light is deactivated
Ithe Clean out airways indicator light will come on when there is a heavy
(The Automatic plus indicator light will also flash once).
2Default setting
(the Automatic plus indicator light will also flash twice).
3the Clean out airways indicator light will come on when there is only a light
Pressing the Start/Stop button switches from one number to another.
Switch the dryer off with the button.
The setting you have selected is now stored in memory. You can change it again at any time.
50