Miele T 8822 C Anti-crease setting, Anti-crease deactivated Hour anti-crease, Hours anti-crease

Page 46

Programmable functions

Anti-crease setting

Anti-crease helps prevent creasing, if laundry is not normally removed immediately after the end of a programme.

After the programme has finished, the drum will continue to rotate at intervals for:

–2 hours (factory default setting).

–1 hour.

It is a good idea to leave the anti-crease function activated to help prevent creasing for when it is not possible to remove laundry immediately after the end of the programme.

Follow steps to to programme and store in memory.

Before you begin, first ensure that:

–The tumble dryer is switched off.

–The door is closed.

Press the Start/Stop button and keep it pressed in whilst carrying out steps

-.

Press the button in.

Wait until the indicator light for the Start/ Stop button lights up constantly . . .

. . . and then release the Start/Stop button.

Press the Low temperature button once.

–The Low temperature indicator light will briefly flash on and off three times.

–P and 2 (default setting) will flash alternately in the display.

The number which appears alternately in the display with P means:

0Anti-crease deactivated

11 hour anti-crease

(The Automatic plus indicator light will also flash once).

22 hours anti-crease

(The Automatic plus indicator light will also flash twice).

(default setting)

Pressing the Start/Stop button switches from one number to another.

Switch the dryer off with the button.

The setting you have selected is now stored in memory. You can change it again at any time.

46

Image 46

Contents Operating instructions For condenser tumble dryer T 8822 C Disposal of your old appliance Caring for the environmentDisposal of the packing material Energy saving tipsContents Contents Safety with children Correct applicationTechnical safety Correct use Accessories Operating the tumble dryer Control panelDisplay shows Programme duration / Estimated time remainingFollowing are also selected via the display Drying Garment care label symbolsTips on drying IroningSort the laundry How to dry correctlyBrief instructions Turn on the tumble dryerSelect a programme Select any Extra options / Delay startDrying level programmes Start the programme Remove the laundry when the programme has finishedBefore the end of a programme Delay start Extra options / Delay startExtra options Hand iron**, Machine iron Programme chartCottons Max. load 7 kg Extra dry, Normal Delicates Max. load 2.5 kg Normal, Hand ironOnly use proofing agents which are stated by Woollens handcare Max. load 2 kgProofing Max. load 2.5 kg Normal Manufacturer as being suitable for use on membraneWarm air Max. load 7 kg Shirts Max. load 2 kg Normal, Hand ironCool air Max. load 7 kg Gentle smoothing Max. load 1 kgOnce a programme has started Altering Delay startChanging the programme sequence Adding or removing laundry after a programme has startedTo activate the lock Electronic system lockTo deactivate the lock Cleaning and care Emptying the condensed water containerCleaning the fluff filters Cleaning them whilst dryCleaning them with water Cleaning the tumble dryer Cleaning the condenser unit Removing the condenser unitChecking the condenser unit Checking and cleaning the condenser unit housing Problem solving guide Check and fault messagesTo switch off the indicator Problem Possible cause RemedyAirways indicator Buzzer sounds To switch off the indicator LightWill not start Indicators for theseCool air programmes Programmes do notAn unsatisfactory drying result Even switches off Other problemsProblem Possible cause Remedy Drying process Goes on too long orPower cut Problem Possible cause Remedy Water leaks fromBeen cleaned Dryer afterChanging the lamp Appliance guarantee After Sales serviceFuture updates PC Optional accessoriesInstallation Front viewRear view Installation siteTransporting the dryer to its installation site Replacing the lidRoom ventilation Before moving the tumble dryer again e.g. when moving houseLevelling the appliance Washer-dryer stackGeneral notes External condensed water outletArranging the drain hose Installation conditions requiring a non-return valve External drainage via a sink or gullyInstallation Electrical connection Non-rewireable plugs BSElectrical connection U.K Consumption data Woollens handcareTechnical data Programmable functions Extending the range of the drying levelsAnti-crease deactivated Hour anti-crease Anti-crease settingHours anti-crease Altering the volume of the buzzer Normal buzzer Default setting Loud buzzerMemory deactivated default setting Memory activated Memory functionFollow steps to to programme and store in memory Extending the cooling down timeCooling down time will be ten minutes longer Clean out airways indicator Default settingKeypad tone Adjusting the dryers electronics for very soft water Default setting Adjusted for very soft waterPage Page Page Alteration rights reserved/1409 Nr 483 560

Related manuals

Manual 64 pages 59 Kb