Miele T 8822 C Cool air programmes, Will not start, Indicators for these, Programmes do not

Page 30

Problem solving guide

Problem

Possible cause

Remedy

The Denim, Shirts and

No obvious cause.

– Switch the dryer off

Cool air programmes

 

 

and then on again.

will not start and the

 

– Select one of the

indicators for these

 

 

programmes.

programmes do not

 

–

If the programme will

light up.

 

 

 

still not start, there is a

 

 

 

 

 

 

fault. Contact the Miele

 

 

 

Service Department.

 

 

–

Use another

 

 

 

programme in the

 

 

 

meantime.

The Start/Stop button

The flashing indicates

After the programme has

flashes/does not flash.

that a programme can be

started, the flashing will

 

started.

change to a constant

 

 

light.

30

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Operating instructions For condenser tumble dryer T 8822 C Disposal of your old appliance Caring for the environmentDisposal of the packing material Energy saving tipsContents Contents Safety with children Correct applicationTechnical safety Correct use Accessories Operating the tumble dryer Control panelProgramme duration / Estimated time remaining Display showsFollowing are also selected via the display Drying Garment care label symbolsTips on drying IroningSort the laundry How to dry correctlyBrief instructions Turn on the tumble dryerSelect any Extra options / Delay start Select a programmeDrying level programmes Remove the laundry when the programme has finished Start the programmeBefore the end of a programme Extra options / Delay start Delay startExtra options Hand iron**, Machine iron Programme chartCottons Max. load 7 kg Extra dry, Normal Delicates Max. load 2.5 kg Normal, Hand ironOnly use proofing agents which are stated by Woollens handcare Max. load 2 kgProofing Max. load 2.5 kg Normal Manufacturer as being suitable for use on membraneWarm air Max. load 7 kg Shirts Max. load 2 kg Normal, Hand ironCool air Max. load 7 kg Gentle smoothing Max. load 1 kgOnce a programme has started Altering Delay startChanging the programme sequence Adding or removing laundry after a programme has startedElectronic system lock To activate the lockTo deactivate the lock Cleaning and care Emptying the condensed water containerCleaning the fluff filters Cleaning them whilst dryCleaning them with water Cleaning the tumble dryer Cleaning the condenser unit Removing the condenser unitChecking the condenser unit Checking and cleaning the condenser unit housing Problem solving guide Check and fault messagesTo switch off the indicator Problem Possible cause RemedyAirways indicator Buzzer sounds To switch off the indicator LightWill not start Indicators for theseCool air programmes Programmes do notAn unsatisfactory drying result Even switches off Other problemsProblem Possible cause Remedy Drying process Goes on too long orPower cut Problem Possible cause Remedy Water leaks fromBeen cleaned Dryer afterChanging the lamp Appliance guarantee After Sales serviceFuture updates PC Optional accessoriesInstallation Front viewRear view Installation siteTransporting the dryer to its installation site Replacing the lidRoom ventilation Before moving the tumble dryer again e.g. when moving houseLevelling the appliance Washer-dryer stackExternal condensed water outlet General notesArranging the drain hose Installation conditions requiring a non-return valve External drainage via a sink or gullyInstallation Non-rewireable plugs BS Electrical connectionElectrical connection U.K Consumption data Woollens handcareTechnical data Programmable functions Extending the range of the drying levelsAnti-crease setting Anti-crease deactivated Hour anti-creaseHours anti-crease Altering the volume of the buzzer Normal buzzer Default setting Loud buzzerMemory deactivated default setting Memory activated Memory functionExtending the cooling down time Follow steps to to programme and store in memoryCooling down time will be ten minutes longer Clean out airways indicator Default settingKeypad tone Adjusting the dryers electronics for very soft water Default setting Adjusted for very soft waterPage Page Page Alteration rights reserved/1409 Nr 483 560
Related manuals
Manual 64 pages 59 Kb
Top Page Image Contents