Miele T 8822 C operating instructions An unsatisfactory drying result

Page 31

Problem solving guide

An unsatisfactory drying result

Problem

Possible cause

Remedy

The laundry is not

The load consisted of

– Finish drying using the

sufficiently dry.

different fabrics.

Warm air programme.

 

 

– Select a different

 

 

programme next time *.

Items made of synthetic

Synthetic fibres tend to

Static charge can be

fibres are charged with

attract static charge.

reduced by adding a

static electricity after

 

fabric conditioner to the

drying.

 

final rinse in the washing

 

 

programme or a fabric

 

 

conditioner sheet to the

 

 

load when drying.

There is a build-up of

Fluff is principally the

Fluff is collected by the

fluff.

result of friction when

fluff filters and can be

 

garments are being worn

removed easily (see

 

and to some extent when

"Cleaning and care").

 

they are being washed.

 

 

Machine drying hardly

 

 

causes any fluff to form

 

 

and has no appreciable

 

 

effect on the lifetime of

 

 

the fabric.

 

*You can alter the drying levels for some programmes (see "Programmable functions" at the the end of this booklet).

31

Image 31
Contents Operating instructions For condenser tumble dryer T 8822 C Energy saving tips Caring for the environmentDisposal of the packing material Disposal of your old applianceContents Contents Correct application Safety with childrenTechnical safety Correct use Accessories Control panel Operating the tumble dryerDisplay shows Programme duration / Estimated time remainingFollowing are also selected via the display Ironing Garment care label symbolsTips on drying DryingTurn on the tumble dryer How to dry correctlyBrief instructions Sort the laundrySelect a programme Select any Extra options / Delay startDrying level programmes Start the programme Remove the laundry when the programme has finishedBefore the end of a programme Delay start Extra options / Delay startExtra options Delicates Max. load 2.5 kg Normal, Hand iron Programme chartCottons Max. load 7 kg Extra dry, Normal Hand iron**, Machine ironManufacturer as being suitable for use on membrane Woollens handcare Max. load 2 kgProofing Max. load 2.5 kg Normal Only use proofing agents which are stated byGentle smoothing Max. load 1 kg Shirts Max. load 2 kg Normal, Hand ironCool air Max. load 7 kg Warm air Max. load 7 kgAdding or removing laundry after a programme has started Altering Delay startChanging the programme sequence Once a programme has startedTo activate the lock Electronic system lockTo deactivate the lock Emptying the condensed water container Cleaning and careCleaning them whilst dry Cleaning the fluff filtersCleaning them with water Cleaning the tumble dryer Removing the condenser unit Cleaning the condenser unitChecking the condenser unit Checking and cleaning the condenser unit housing Check and fault messages Problem solving guideBuzzer sounds To switch off the indicator Light Problem Possible cause RemedyAirways indicator To switch off the indicatorProgrammes do not Indicators for theseCool air programmes Will not startAn unsatisfactory drying result Goes on too long or Other problemsProblem Possible cause Remedy Drying process Even switches offDryer after Problem Possible cause Remedy Water leaks fromBeen cleaned Power cutChanging the lamp Optional accessories After Sales serviceFuture updates PC Appliance guaranteeFront view InstallationReplacing the lid Installation siteTransporting the dryer to its installation site Rear viewWasher-dryer stack Before moving the tumble dryer again e.g. when moving houseLevelling the appliance Room ventilationGeneral notes External condensed water outletArranging the drain hose External drainage via a sink or gully Installation conditions requiring a non-return valveInstallation Electrical connection Non-rewireable plugs BSElectrical connection U.K Woollens handcare Consumption dataTechnical data Extending the range of the drying levels Programmable functionsAnti-crease deactivated Hour anti-crease Anti-crease settingHours anti-crease Normal buzzer Default setting Loud buzzer Altering the volume of the buzzerMemory function Memory deactivated default setting Memory activatedFollow steps to to programme and store in memory Extending the cooling down timeCooling down time will be ten minutes longer Default setting Clean out airways indicatorKeypad tone Default setting Adjusted for very soft water Adjusting the dryers electronics for very soft waterPage Page Page Alteration rights reserved/1409 Nr 483 560
Related manuals
Manual 64 pages 59 Kb