31
Disassembly -- Drum (4), Outer Drum (Tub)(Tub)
HINT: After removing
crossbar screws, remove crossbars by rotating bottom of them out from washer.
HINT: Before disconnecting wire harnesses from control module, mark each one to insure proper reassembly (as several connectors look identical).
HINT: To access wire harness connectors to disassemble them, separate control module from fascia panel by carefully prying back plastic clips around the module.
HINT: Unscrew band screws and remove band from front counterweight.
HINT: Loosen spring clamps and disconnect hoses from dispenser.
1st Edition/Revision 5 (1/20/04)