66
WFR 2460 Service Tips -- Test Programram (10)(10)
HINT: To save time with Test T18, press Menu to stop testing after the temperature has gone up several degrees, confirming the washer is heating OK.
NOTE: On Test T18, the water level rises until NH, which is the heating water level.
HINT: Start/Pause button light:
•Flashes red when tests can be selected or scrolled through.
•Stays red continually when tests are running.
•Stays yellow continually when drum is accelerating/running at max. speed (during drum motor test) or has reached ND water level (~ n152 pressure switch reading
•Flashes yellow when drum is slowing down from 1200 RPM max. speed during drum motor test.
1st Edition/Revision 5 (1/20/04)