70
WFL 2060 Service Tips -- Resistancence
Measurements from Control Module (2)
Disconnect & measure white
• | Pins | 14 - 35 Ω | |
• | Pins | 1.5 | - 10 Ω |
• | Pins | 0.7 | - 2.1 Ω |
1
1
Pink
connector with pink wires
Disconnect & measure white 3- pin connector (with blue wires) to measure door latch motor. Measure between pins
1 | 11 |
Black connector
with pink wire
Disconnect & measure 2 connectors to measure heater. Measure between pin 1 (far left connector in group of 7 pins) and pin 2 (2nd pin from right) of pressure switch connector. Heater should read 23.2 - 29.4 Ω.
WARNING! Unplug washer before making any resistance measurements.
1st Edition/Revision 5 (1/20/04)