42
WFL 2060 Service Tips -- Configuringring
Replacement Control Modules
Replacement WFL 2060 control modules (# 481304) aren’t configured. Please follow these instructions to set
CAUTION: If settings aren’t done correctly, | ||
washers can eventually be damaged! | ||
Switch S1 |
| |
Switch # | Setting | Notes |
1 | off |
|
2 | on | Sets spin speed to 1000 RPM max. |
3 | on |
|
4 | off | Sets panel buttons to Power Wash , |
5 | on | Rinse Plus & Quick Wash and |
6 | off | enables spin selector knob. |
7 | off | Sets hot water inlet on. |
8 | on | U.S. model variations enabled. |
CAUTION: Static electricity can damage module components. Take care to shield modules from static electricity.
Switch S10
Switch # Setting Notes
1on
2off
HINT: Modules cannot be configured using the washer
control panel.
1st Edition/Revision 5 (1/20/04)