Bosch Appliances WFL 2060UC, WFR2460UC, WFR 2460UC manual WFR 2460 Service Tips -- Resistancence

71

WFR 2460 Service Tips -- Resistancence

Measurements from Control Module (1)

Disconnect & measure white 6-pinconnector (with blue wires) to measure drum drive motor. Motor should read (pin 1 is at far right):

•	Pins 1-2:	14 - 35 Ω
•	Pins 3-4:	1.5	- 10 Ω
•	Pins 5-6:	0.7	- 2.1 Ω

Disconnect & measure blue 2-pinconnector (with blue wires) to measure drain pump. Pump should read ~ 80 - 94 Ω.

1

1 1

Disconnect & measure white 3-pinconnector (with blue wires) to measure door latch motor. Measure between pins 1-2 (pin 1 at far left). Motor should read ~ 211 - 259 Ω.

Disconnect & measure white 2-pinconnector (with black wires) to measure NTC. NTC should read:

•	20ºC (68ºF):	5.4 - 6.5 kΩ
•	30ºC (86ºF):	3.5 - 4.3 kΩ
•	40ºC (104ºF):	2.3 - 2.9 kΩ

WARNING! Unplug washer before making any resistance measurements.

1st Edition/Revision 5 (1/20/04)