76
WFL 2060 Service Tips -- WFL 2060 Nott RunningRunning
WFL2060 drain pump is located at washer right front corner (photo viewing rear of washer)
Push on white (or gray) drain pump electrical connector (if it has been pulled off).
IMPORTANT
Shipping bolt
locations
NOTE: Occasionally, WFL2060 washers have been set up for sales demonstration and not reconfigured for normal use when they were sold.
HINT: When repairing WFL2060 washers that won’t run at all, check the drain motor first to see if its connected.
NOTE: WFL2060 washers cannot be set up for sales demonstration mode since the control senses the drain motor during start up.
HINT: If WFL2060 washers have been set up for sales demonstration and not reconfigured for normal use, all lights will turn on and washers won’t run. If this occurs, check the drain motor first.
HINT: If electrical tape has been used on the washer, carefully clean off all tape adhesive residue to insure good electrical connections.
HINT: When repairing WFL2060 washers that won’t run at all, if the drain motor has been disconnected for sales display, please check the following:
•Make sure the drain motor is reconnected.
•Make sure the fuscia label has been removed from the rear of the the washer.
•Make sure the shipping bolts have been removed.
1st Edition/Revision 5 (1/20/04)