43
WFR 2460 Service Tips -- Configuringring
Replacement Control Modules
Replacement WFR 2460 control modules (# 484014) aren’t configured. Please follow these instructions to configure replacement modules.
•After installing module, enter test program by first pushing and holding Menu & Select buttons, then rotating selector switch (dial) ccw to Permanent Press Cold (until display comes on).
•Push Menu button repeatedly to scroll to test “T5”: Model Variant Coding. Red light on Start/Pause button will be flashing. Push Start/Pause button to enter test T5 to change #’s (red light will stop flashing when test T5 has been entered).
•Push Menu button to scroll to each # (when desired
# is flashing). For each #, push Select button until correct setting is chosen, then push Start/Pause button to save setting. Repeat until settings for all eight #’s are saved
42010011.
•When settings for all eight #’s are saved, exit test program by rotating selector switch (dial) cw to Off.
NOTE: Note original equipment washer modules are factory configured and CANNOT be changed in the field.
Sample Displays
42010011 T5: Variant 
Push Menu button to select 1st # for max. spin speed (until 1st # flashes), then push Select button until “4” (for 1200 RPM max.) is chosen. Push Start/Pause button to save setting.
42010011 T5: Variant 
Push Menu button to select 2nd # for water inlet (until 2nd # flashes), then push Select button until “2” (hot water) is chosen. Push Start/Pause button to save setting.
42010011 T5: Variant 
Push Menu button to select 7th # for language (until 7th # flashes), then push Select button until “1”
(for English) is chosen. Push
Start/Pause button to save setting.
NOTE: See test program page 61 for all test T5 settings.
Max. spin speed
2! 1000 RPM 3! 1100 RPM 4! 1200 RPM
5! 1300 RPM 6! 1400 RPM 7! 1500 RPM 8! 1600 RPM
Water inlet
0! Without Aqua stop, cold water
1! With Aqua stop, cold water
2! Without Aqua
stop, hot water
Language
0! German
1! English
2! French
3! Dutch
4! Italian
5! Spanish
E! Polish
1st Edition/Revision 5 (1/20/04)