56
WFL 2060 Service Tips -- Test Programram (5)(5)
Comprehensive Test Sequence Chart
HINT: “n” = spin
speed & nmax = max. spin speed of 1000 RPM.
HINT: Rinse/Spin light goes out when max. speed of 1000 RPM is reached. Both Door locked and Rinse/Spin lights come on when test has ended.
HINT: Water valves are tested in order:
•Left side of cold water valve
•Hot water valve – flows into left side of dispenser.
•Left & right sides of cold water valve (Wash) – flows into right side & center of dispenser.
HINT: Before leaving, make sure door isn’t locked. To drain washer to open locked door (locked during wash or test):
•Exit test program by turning washer off. Turn washer on, then rotate cycle selector knob to Drain and push Start button.
•Door can be opened after washer drains and Door locked light flashes (Door locked light flashes ~ 2 minutes after washer drains).
To exit test program (from any test), turn unit off by pressing "ON/OFF" button.
1st Edition/Revision 5 (1/20/04)