Alliance Laundry Systems 200, 75, 40, 33, 100, 135, 165, 18, 55 manual Main Switch

Page 17

	Specifications and Dimensions
11	8.66 in.
	(220 mm)

40.87 in. (1038 mm) 39.8 in. (1011 mm)

10.98 in. (279 mm)

1.3in. (33 mm)

2.56 in.	20.87 in. (530 mm)
(65 mm)	25.98 in. (660 mm)
8.9 in. (226 mm)
5.94 in. (151 mm)	1
2.95 in. (75 mm)

10

9

	1.3 in.	1.18 in.		1.18 in.
	(33 mm)	(30 mm)	18: 23.23 in. (590 mm)	(30 mm)
	2.56 in.		18: 23.23 in. (590 mm)
	2.56 in.		25: 27.17 in. (690 mm)
	(65 mm)		25: 27.17 in. (690 mm)
	(65 mm)
	CFD521N		18: 26.38 in. (670 mm)
CFD521N			25: 30.31 in. (770 mm)
2 3		2.72 in.	18: 28.62 in. (727 mm)
2 3	4 5	(69 mm)	25: 32.56 in. (827 mm)	CFD522N
	4 5			CFD522N

6

7

34.92 in. (887 mm) 31.14in. (791 mm) 29.41 in. (747 mm) 19.1 in. (485 mm)

8

4.3 in.

(109 mm)

7.09in. (180 mm) 25.98 in. (660 mm)

27.41 in. (696.2 mm)

2.76 in. (70 mm)

1.73 in.
(44 mm)	CFD528N
	CFD528N

CFD528N

	18 and 25 Pound Capacity Models with A or M in the 8th Position (e.g. *X18PVXM6)
1	Fill and Supply Ventilation	7	Electrical Power Input
2	Cold Water Inlet (Required)	8	Drain Outlet
3	External Liquid Supply Inlets	9	Steam Connection Input (Optional)
4	Hot Water Inlet (Required)	10	Cold Water Inlet (Required)
5	Ventilation Tub	11	Flushing Supply Dispenser

6Main Switch

Figure 4

9001000

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

15

Image 17

Contents Washer-Extractors Page Contents Important Safety Instructions Explanation of Safety MessagesSafety Information Safety Decals Operator Safety Model Identification Introduction100 135 165 200 Introduction Nameplate Location Replacement PartsCustomer Service 0001 Introduction Model Number Familiarization GuideWeight and Shipping Information General Specifications Model Overall DimensionsWash Cylinder Information Door Opening InformationCentrifugal Force Data Cylinder SpeedsBalance Detection Direct Steam Heating OptionalWeight and Shipping Information RPM Specifications and Dimensions Main Switch Electrical Power Inputs Flushing Supply Dispenser Steam Connection Input Optional 88 mm 220 mm Mm 53.07 in mm 50 mm 34 mm Model 1168 mm 1575 mm 33.6 1010 mm 305 mm 360 mm 56.5 mm Recommended Minimum Clearances Model 100 135 165 200 InstallationFloor Load Data Model 100 135 165 200 InstallationImportant Drawing is not to scale Mechanical InstallationPound 34 mm 22 mm 26.18 665 mm 26.77 50 mm 680 mm 30.71 780 mm 712 mm 34 mm 22 mm 30.12 765 mm 898 mm 42.52 47.24 1200 mm 40 mm 1200 mm 42.5 mm 1300 mm 33 mm 44.8 660 mm 55 mm 30.31 782 mm 45 mm Mounting Bolt Installation If Required Removing the Transport Brackets Front Rear 40 Models Rear of Machine Drain ConnectionMinimum Drain ID Model Number of Machines Model 100 135 165 200Water Supply Information Model 100 135 165 200 Water ConnectionDo not use a phase adder on any variable- speed machine Electrical InstallationCycle Phase Wire Full Load Amps Installation Remote Liquid Supply Connection Electrical ConnectionSteam Supply Information 18-75 100/135 165/200 Steam Requirements Steam Heat Option OnlySupply Programming Table Example Pumps 24V ~ Automatic Lubricator Out-of-Balance SwitchMachine Control Function Test