Fisher & Paykel 4323 installation instructions Lid lock, LID Lock light

Page 12

10

Lid lock

Your Smart Drive™ has a lid lock, which locks when your machine is spinning. This ensures the lid cannot be opened during hazardous parts of the cycle, providing added safety for you and your family.

The LID LOCK light (above the START/PAUSE button) comes on when the lid is locked to tell you when you cannot open the lid. In short it means you can open the lid while your Smart Drive™ is filling, agitating and draining, but not while it is spinning.

When the LID LOCK light is on, the lid is locked. When the LID LOCK light is off, the lid is not locked and the lid can be opened.

If the LID LOCK light is flashing the lid lock is in process of locking or unlocking (ie while the machine coasts down or START/PAUSE has been pressed). During this stage the lid still cannot be lifted.

EXCELLENCE

PRIDE

Fig.8 LID LOCK light

Important!

If the lid is left open, the machine will be unable to lock and the cycle will be halted. The machine will play a tune and the LID LOCK light will flash until the lid is closed and START/PAUSE is pressed.

The lid lock remains unlocked for the majority of the cycle allowing you to add clothes, dissolve detergent or to add fabric softener (if you do not want to use the Automatic Fabric Softener Dispenser).

The chart below shows the stages when the lid is locked.

Fill

Unlocked

 

Agitate

Unlocked

 

Spray Rinse

Locked

 

Deep Rinse

Unlocked

 

Spin

Locked

Fig.9 Lid lock

 

 

Important!

Keep children away from the machine, especially when you are using hot water, as the lid can be opened during fill and agitate.

DO NOT put anything down the slot in the top deck of your machine. DO NOT try to disable the lid lock.

4323_NZ_AU_PAC_GW_MW_Washer_UG11.indd 10

8/10/09 2:45:23 PM

Image 12
Contents Installation instructions Intelligence working for you Contents Installation instructions UnpackingLocation Drain hoseInlet hoses LevellingCold supply only To check if your machine is levelClothes washer safety Accessories and spare partsWater supply DrainingGetting started Before you do your first washUsing your Excellence washer DetergentFabric softener Power Wash cyclesWash options AdvanceUsing your Pride washer Pride WA55T56MW1 MW512 Fabric softenerIf you wish to stop your Pride washer Lid lock LID Lock lightDefault settings Model variationsBasic cycle descriptions Clothes care safeguards Wash options and advancing the cycleTo select the wash options Wash progress lightsWater levels Manual water level selectionAuto water level Excellence model onlyWash options saving water and time Quick washExcellence and Pride model Delay Start Wash optionsSoak Nappy sanitisers/bleachWashing bulky items Washing woollensFavourite cycle Favourite cycleTo set your favourite cycle To use your favourite cycleCustomising the wash cycles To customise a cycleBefore you wash SortingLoading Lint givers Lint collectorsDetergent Choosing the right detergentHow much detergent? Adding the detergentCleaning the dispenser Fabric softenerHow the fabric softener is dispensed How much fabric softener?Option adjustment mode To enter option adjustment modeChanging pre-set options Use the buttons on the panel to change the pre-set options Wash temperatures DefaultRinse options MED spin light onControlled cold End of cycle beepsAuto water fill level Light on OptionOut of balance recovery routine SpecificationsMachine information When you have finished Cleaning your Smart DriveCleaning the inside of your Smart Drive Cold water washingProducts that might damage your Smart Drive Smart Drive sounds and beepsAutomatic lint system Saving water Recycling the wash waterRecycling the water from a deep rinse Manual suds save with syphon back Return Hose to DrainHOT water temperature light is flashing Cold water temperature light is flashingHOT and Cold water temperature lights are flashing High water level light is flashingSingle beep every second and... possible solutions If your Smart Drive beeps for helpLID Lock light is flashing Some lights are on but the pattern of lights is unfamiliarOperating problems Wash problems Dye transfer TanglingManufacturer’s Warranty This warranty does not coverFisher & Paykel undertakes to Please keep this User Guide in a safe placeBefore you call for service or assistance… Customer CareNew Zealand if you need assistance Australia if you need assistanceNZ AU PAC