12
Wash options and advancing the cycle
To select the wash options
EXCELLENCE model
1Select the wash cycle, temperature, water level and spin speed (refer to page 7).
2Press the OPTIONS button if you want to choose ECO, SOAK or QUICK WASH (refer to pages 14 and 15).
3Press START/PAUSE.
PRIDE model
1Select the wash cycle, temperature, water level and spin speed (refer to page 9).
2If you wish to save water press the ECO option button (refer to page 14).
3Press START/PAUSE.
The wash progress lights
The wash progress lights show all the tasks your Smart Drive™ will do during the wash cycle. As each task is completed a light goes out, so you can tell at a glance how far the cycle has to go.
To advance the wash cycle
EXCELLENCE
PRIDE
Fig.10 Selecting wash options
Fig.11 Wash progress lights
Note: while EXCELLENCE model is shown, PRIDE model is identical
1Press POWER.
2Press the button with the ‘two arrows’ repeatedly to advance the cycle, to the desired position.
3Press START/PAUSE.
Note: each wash progress light equals 3 minutes of agitation. The ECO option wash progress lights may in some cases wash for longer. This is dependent on the water level. The QUICK WASH option shortens the agitation time for each progress light (EXCELLENCE model only).
EXCELLENCE
PRIDE
Fig.12 Advancing the wash cycle
Clothes care safeguards
To avoid accidentally damaging your clothes there are a few options that your Smart Drive™ will not accept. For example, you cannot select a HOT wash on HAND WASH or EASY IRON cycles (EXCELLENCE model) or DELICATE or WOOL cycles (PRIDE model), or choose the ECO option on anything other than the HEAVY DUTY or REGULAR cycles (both models).
4323_NZ_AU_PAC_GW_MW_Washer_UG11.indd 12 | 8/10/09 2:45:24 PM |