Fisher & Paykel 4323 Manufacturer’s Warranty, Fisher & Paykel undertakes to

Page 38

36

Manufacturer’s Warranty

You automatically receive a 2 year Manufacturer’s Warranty with the purchase of this Product covering parts and labour for servicing within the country of purchase.

Fisher & Paykel undertakes to

Repair or, at its option, replace without cost to the owner either for material or labour any part of the Product, the serial number of which appears on the product, which is found to be defective within TWO YEARS of the date of purchase.

This warranty DOES NOT cover

AService calls which are not related to any defect in the Product. The cost of a service call will be charged if the problem is not found to be a Product fault. For example:

1.Correcting the installation, eg removal of bottom packer and transit bolts (front loading washers), levelling the machine, adjustment of the drain to correct syphoning, noises, crossed, kinked or leaking inlet hose connections, turning on water, noises caused by the waterhammer or power supplies.

2.Providing instruction on use of the product or changing the set-up of the product, eg instruction on correct use of detergents and fabric softeners.

3.Replacing fuses in, or correcting house wiring or correcting house plumbing, eg unblocking drains.

4.Correcting fault(s) caused by the user.

5.Noise or vibration that is considered normal, eg spin sounds, user warning beeps.

6.Correcting damage caused by pests, eg rats, cockroaches, etc.

7.Water on the floor due to incorrect loading or excessive suds.

8.Blocked pumps, removal of foreign objects/substances from the machine, including the pump and inlet hose filters, eg bra wires, bread tags, nails, grit, scrud, etc.

9.Correcting corrosion or discolouration due to chemical attack.

BDefects caused by factors other than:

1.Normal domestic use or

2.Use in accordance with the Product’s User Guide.

CDefects to the Product caused by accident, neglect, misuse or ‘Act of God’.

DThe cost of repairs carried out by non-authorised repairers or the cost of correcting such unauthorised repairs.

ENormal recommended maintenance as set out in the Product’s User Guide.

FRepairs when the appliance has been dismantled, repaired or serviced by other than a Fisher & Paykel Authorised Repairer or the selling dealer.

GPick-up and delivery.

HTransportation or travelling costs involved in the repair when the Product is installed outside the Fisher & Paykel Authorised Repairer’s normal service area.

This Product has been designed for use in a normal domestic (residential) environment. This Product is not designed for commercial use (whatsoever). Any commercial use by a Customer will affect this Product’s Warranty.

Service under this Manufacturer’s Warranty must be provided by a Fisher & Paykel Authorised Repairer (refer to the ‘Customer Care’ section at the back of this book). Such service shall be provided during normal business hours. This Warranty certificate should be shown when making any claim.

Note

This Warranty is an extra benefit and does not affect your legal rights.

Please keep this User Guide in a safe place.

4323_NZ_AU_PAC_GW_MW_Washer_UG11.indd 36

8/10/09 2:45:28 PM

Image 38 Contents
Installation instructions Intelligence working for you Contents Location Installation instructionsUnpacking Drain hoseCold supply only Inlet hosesLevelling To check if your machine is levelWater supply Clothes washer safetyAccessories and spare parts DrainingGetting started Before you do your first washFabric softener Using your Excellence washerDetergent Wash options PowerWash cycles AdvanceUsing your Pride washer Pride WA55T56MW1 MW512 Fabric softenerIf you wish to stop your Pride washer Lid lock LID Lock lightBasic cycle descriptions Default settingsModel variations To select the wash options Clothes care safeguardsWash options and advancing the cycle Wash progress lightsAuto water level Water levelsManual water level selection Excellence model onlyExcellence and Pride model Wash options saving water and timeQuick wash Soak Delay StartWash options Nappy sanitisers/bleachWashing bulky items Washing woollensTo set your favourite cycle Favourite cycleFavourite cycle To use your favourite cycleCustomising the wash cycles To customise a cycleLoading Before you washSorting Lint givers Lint collectorsHow much detergent? DetergentChoosing the right detergent Adding the detergentHow the fabric softener is dispensed Cleaning the dispenserFabric softener How much fabric softener?Changing pre-set options Option adjustment modeTo enter option adjustment mode Use the buttons on the panel to change the pre-set options Rinse options Wash temperaturesDefault MED spin light onAuto water fill level Controlled coldEnd of cycle beeps Light on OptionMachine information Out of balance recovery routineSpecifications Cleaning the inside of your Smart Drive When you have finishedCleaning your Smart Drive Cold water washingAutomatic lint system Products that might damage your Smart DriveSmart Drive sounds and beeps Recycling the water from a deep rinse Saving waterRecycling the wash water Manual suds save with syphon back Return Hose to DrainHOT and Cold water temperature lights are flashing HOT water temperature light is flashingCold water temperature light is flashing High water level light is flashingLID Lock light is flashing Single beep every second and... possible solutionsIf your Smart Drive beeps for help Some lights are on but the pattern of lights is unfamiliarOperating problems Wash problems Dye transfer TanglingFisher & Paykel undertakes to Manufacturer’s WarrantyThis warranty does not cover Please keep this User Guide in a safe placeNew Zealand if you need assistance Before you call for service or assistance…Customer Care Australia if you need assistanceNZ AU PAC