24
Changing pre-set options
Wash temperatures
On the PRIDE model the WARM temperature can be adjusted if you think it is too hot or too cold. Note: on these models the hot temperature will be the same as the hot water supply temperature.
On EXCELLENCE model all wash temperatures can be individually adjusted.
1Select the WASH TEMPERATURE you want to adjust.
2The wash progress lights show the temperature adjustment possible for that temperature.
Pressing the ADVANCE will cause the wash progress light that is on to change. Advancing the wash progress light will increase the wash temperature. If you keep pressing the ADVANCE, the light will scroll back to the coldest setting available for that wash temperature.
Fig.29 Adjusting the temperature setting
Note: while EXCELLENCE model is shown, the setting of the PRIDE model is identical
Note: if you have a PRIDE model and still can’t get the temperature you require, advance the progress light (while in the options adjustment mode) across to SPIN and manually adjust the flow of the taps.
Rinse options
On the HEAVY DUTY and REGULAR cycles (EXCELLENCE model) and on the HEAVY DUTY, REGULAR and WOOL cycles (PRIDE model) you
can change the
|
| Rinse 1 | Rinse 2 | |
The default rinse option on these cycles is a spray | MED spin light on | Deep | Deep | |
rinse followed by a deep rinse. The first step of | ||||
rinse | rinse | |||
the default rinse can be replaced with a short |
| |||
|
|
| ||
| Short | Deep | ||
spin, or a deep rinse, by selecting another option. | SLOW spin light on | |||
spin | rinse | |||
|
| |||
|
|
|
| |
If you have a problem with impurities in your | HOLD light on | Spray | Deep | |
water supply you may get a better result if you | (default) | rinse | rinse | |
change the rinse option to 2 DEEP rinses. If you |
|
|
| |
wish to conserve water, change the rinse option |
|
|
| |
to 1 DEEP rinse. If you want to conserve even |
|
|
| |
more water, choose the ECO option. |
|
|
|
4323_NZ_AU_PAC_GW_MW_Washer_UG11.indd 24 | 8/10/09 2:45:27 PM |