Changing pre-set options
Controlled cold
25
EXCELLENCE model only
If your cold water temperature is very low you will not get a very effective wash. The CONTROLLED COLD option solves this problem by adding a small amount of hot water to raise the temperature of the wash. We have called this “CONTROLLED COLD”.
1Select COLD wash temperature.
2The wash progress lights show the temperature adjustment possible.
When the first progress light is on, the machine will fill with cold water only.
Press the ADVANCE button to select the second light and your Smart Drive™ will control the temperature to approximately 20°C. Each following light equals approximately a 1°C temperature rise.
Note: if you always use COLD or CONTROLLED COLD water, we recommend that a WARM or HOT wash be used regularly, eg every 5th wash should be at least a warm one.
Fig.30 Changing the wash temperature setting
End of cycle beeps
EXCELLENCE model only
The beeps signalling the end of the cycle can be increased or decreased. Press the options button up to increase beeps or down for no beeps.
Auto water fill level
EXCELLENCE model only
If you are not satisfied with the level that your Smart Drive™ fills to on AUTO water level, you can increase or decrease the fill level that AUTO will select.
Note: if you feel there is not enough water for the load, we recommend you check by pausing the machine and pushing the clothes down to see how much spare water is at the bottom of the bowl. Clothes often float and your Smart Drive™ can sense the water under the clothes.
Light on | Option |
FAVOURITE | less water |
|
|
EASY IRON | factory setting |
|
|
ALLERGY | more water + |
|
|
HAND WASH | more water ++ |
|
|
HEAVY DUTY | more water +++ |
|
|
4323_NZ_AU_PAC_GW_MW_Washer_UG11.indd 25 | 8/10/09 2:45:27 PM |