LG Electronics F1256QD service manual Test operation

Page 12

9 Test operation

1 Preparation

2 Press the power button.

3 Press the START/PAUSE

for washing.

 

button.

·

Connect the power plug to the

· In case of cotton program.

 

outlet.

 

·

Connect the inlet hose.

 

6 Check the water heating.

5 Check automatic reverse turn.

4 Check the water supply.

· Press “Temp.” button,

 

 

the present temperature will

· Check if the drum rotates

· Check if water is supplied through

be displayed.

clockwise and counterclockwise.

the detergent dispenser.

7 Check drain and spin.

8 Power off and open the door.

9 Water removal.

· Power off and then power on. Turn on Spin lamps after pressing the Start/Pause button and Start the machine again.

· Check drain and spin.

· Power off and then power on.

· Check if the door can be opened after Door Lock lamp turns off.

·If SVC is needed during check, remove the remaining water by pulling out the hose cap.

11

Image 12
Contents Washing Machine No. MFL30574749 Contents Specification F1*20TD1~9 / F1*22TD1~9/F1*56*D/WD-*690TDKFeatures & Technical Explanation FeaturesDetermine Washing Time by Fuzzy Logic Water Level ControlDoor can not be Opened Door Lower cover Adjustable Feet Power PlugParts Identification DrawerInstallation InstallationCheck the conditions of installation area Open the box and check appliance conditionUse spanner to remove transit bolts Confirm the distance between the appliance and the wallTap connection and hose connection must be parallel Connect power plug Connect Drain HoseCheck the horizontality with a level Gage StepTest operation Start/Pause button Tub Clean OperationOption Wash program selectorLoad Test Mode Time Delay & Beep ON/OFFPower button Water temperature selectorStart/Pause button Option buttonIntensive Rinse Spin Button Chart MotorPCB Layout Program Chart Troubleshooting Before Performing ServiceLoad Test Mode HOW to Know the Water Level FrequencyError Display Error Symptom CauseTroubleshooting with Error Water Inlet Error IEUnbalanced Error UE Water Outlet Error OE How to disassemble and clean pump filterBind Over Flow Error FE Drawer continuously?Pressure Sensor S/W Error PE Door Open Error dE Does the Door Switch operate as follows?Thermistor Heating Error tE MIN STD MAXMotor Locked Error LE Disassemble the Hall Sensor Assemble the Hall SensorTroubleshooting Without Error Codes No PowerVibration & Noise In Spin Detergent & Softener does not flow Water Leak Water Leak from DispenserUnknown Water on Floor Disassembly Instructions Control PanelDispenser Assembly Dispenser AssemblyInlet Valve Lower Cover DoorGasket Assembly Rotor ASSEMBLY, Stator ASSEMBLY, Friction Damper Assembly CommonPump HeaterSwitch ASSEMBLY, Door Lock When Foreign Material is Stuck Between Drum and TUBExploded View Exploded View of Control Panel & Dispenser Assembly Exploded View of Drum & TUB Assembly