LG Electronics F1256QD service manual Disassembly Instructions, Control Panel

Page 37

9. DISASSEMBLY INSTRUCTIONS

Be sure to unplug the machine out of the outlet before disassembling and repairing the parts.

CONTROL PANEL

PLATE ASSEMBLY (TOP)

Hook

1Unscrew 2 screws on the back of the top plate.

2Pull the top plate backward and upward as shown.

1Disconnect the PWB assembly connector from Main lead wire assembly.

2Pull out the drawer and unscrew 2 screws.

3Push upper hooks down on the top and pull the control panel.

PANEL ASSEMBLY (CONTROL)

1Disconnect the PWB assembly (Main & Display)

from control panel by unscrewing 7 screws.

36

Image 37

Contents Washing Machine No. MFL30574749 Contents F1*20TD1~9 / F1*22TD1~9/F1*56*D/WD-*690TDK SpecificationFeatures Features & Technical ExplanationWater Level Control Determine Washing Time by Fuzzy LogicDoor can not be Opened Power Plug Door Lower cover Adjustable FeetParts Identification DrawerInstallation InstallationCheck the conditions of installation area Open the box and check appliance conditionConfirm the distance between the appliance and the wall Use spanner to remove transit boltsTap connection and hose connection must be parallel Connect Drain Hose Connect power plugStep Check the horizontality with a level GageTest operation Operation Start/Pause button Tub CleanOption Wash program selectorTime Delay & Beep ON/OFF Load Test ModePower button Water temperature selectorOption button Start/Pause buttonIntensive Rinse Spin Button Motor ChartPCB Layout Program Chart Before Performing Service TroubleshootingLoad Test Mode HOW to Know the Water Level FrequencyError Symptom Cause Error DisplayWater Inlet Error IE Troubleshooting with ErrorUnbalanced Error UE How to disassemble and clean pump filter Water Outlet Error OEBind Drawer continuously? Over Flow Error FEPressure Sensor S/W Error PE Does the Door Switch operate as follows? Door Open Error dEMIN STD MAX Thermistor Heating Error tEMotor Locked Error LE Assemble the Hall Sensor Disassemble the Hall SensorNo Power Troubleshooting Without Error CodesVibration & Noise In Spin Detergent & Softener does not flow Water Leak from Dispenser Water LeakUnknown Water on Floor Control Panel Disassembly InstructionsDispenser Assembly Dispenser AssemblyLower Cover Door Inlet ValveGasket Assembly Common Rotor ASSEMBLY, Stator ASSEMBLY, Friction Damper AssemblyHeater PumpWhen Foreign Material is Stuck Between Drum and TUB Switch ASSEMBLY, Door LockExploded View Exploded View of Control Panel & Dispenser Assembly Exploded View of Drum & TUB Assembly