Over Flow Error (FE)
Is the water coming in | YES | Replace the Inlet Valve assembly. |
|
| |
drawer continuously? |
|
|
NO
After power off for 10 sec. and power on.
Does the water level over reference line and Is not the water level frequency 25.5Khz or 26.1Khz ? Or does not the water level over reference line and is the water level frequency 25.5Khz or 26.1Khz?
YES
Replace the Main PCB.
F1*22TD Press | F1*20TD Press “Intensive” |
“Temp.” and “Medic Rinse” |
|
NO
Check the Air Chamber and the Tube (clogged).
If FE is displayed again,
then replace the Pressure Switch.
If FE is displayed again, then replace the Main PCB.
25