INLET VALVE
3 |
2 |
1 |
1Disconnect the wiring receptacle.
2Unscrew 2 screws from the back.
When reconnecting the connector
VALVE #1 (MAIN) | White / Black - Black |
|
|
VALVE #2 (PRE) | Gray / White - Black |
|
|
VALVE #3 (HOT) | Blue / Red - Black |
|
|
•Rating : 220/240V 50/60Hz
•Resistant : 3.5~4.5kΩ
LOWER COVER
DOOR
Open the lower cover cap by using coin and pull out the lower cover to the arrow direction after a screw is unscrewed.
1Open the door completely.
2Remove the two screws from the hinge.
When removing the door assembly, it is necessary to hold the bracket that is inner of the cabinet cover.
38