F1*20TD(1~9)
LOAD TEST MODE 
Page 19
- Press and Hold ‘Option’ & ‘Spin’ buttons and then press ‘Power’ button.
Water level frequency
- Press and Hold ‘Intensive’ button.
Time Delay & Beep ON/OFF
•Press the button when delayed washing is needed.
•When the button is pressed, [ 
] is displayed, maximum delay of [ 
] hours can be set.
•Each press advances time delay by the hour.
•Use [Power] button to cancel [Time Delay]
•[Time Delay] means the time required from the present to the completion of washing.
•The Beep on/off function can be set by pressing and holding the Time Delay button (About 3 seconds).
The Beep on/off function can be set at any time and it is automatically cancelled in the event of a power cut. The Beep on/off function also works when power is off.
Intensive
Rinse | Spin Button |
•If the laundry is heavily soiled “Intensive” option is effective.
•By selecting the Intensive option, the wash time may be extended, depending on the program selected.
Tub Clean
•Tub Clean course can be set by pressing and hold Spin and Temp. button simultaneously.
•Tub Clean is special cycle to clean the inside of the washer.
Water temperature selector
•By pressing the Rinse button, the Rinse type can be selected.
•By pressing the Spin Button the spin speed can be chosen
•F10**TD(1~9)
No Spin/400/600/800/1000
• F12**TD(1~9)
No Spin/400/800/1000/1200
• F14**TD(1~9)
No Spin/400/800/1000/1400
•Press the button to select water temperature.
•95°C is selected for Cotton and Baby Care only.
•By pressing the button while operating the washer, the present temperature is displayed.
15