LG Electronics F1256QD service manual Start/Pause button, Option button

Page 15

5-2. F1*20TD(1~9)

Wash program selector

9 program can be set depending on the type of the laundry.

If the power button is pressed, Cotton program is automatically set.

By turning the dial, [Cotton - Cotton Quick - Synthetic - Delicate - Wool/Silk - Hand Wash - Quick 30 - Duvet - Baby Care] can be selected.

This is a bi-directional selector.

LED display

Display the estimated remaining time (Hour : Minute) to finish.

In case of abnormal operation, error indications are displayed.

(

)

• See troubleshooting guide.

 

Power button

Press the button to turn power

on and off.

Press the button to cancel the delay finish.

Start/Pause button

Use the button to start or pause wash cycle.

The power turns off automatically 4 minutes after the pause button is pressed.

Option button

Pre Wash : Use this option for loads that need pretreatment. It add 16 minutes pre wash and drain.

Rinse+Spin : Use this option to rinse and then spin.

Soaic : Use this mode to wash normal clothes or think and heavy clothes which are excessively dirty.

Spin Only : When you want Spin only, select this option.

Bio : If you want to eliminate protein stains, you may select Bio function.

Child -Lock

Child Lock system can be set and canceled by pressing and holding both Option and Rinse buttons simultaneously more than 3 seconds.

14

Image 15
Contents Washing Machine No. MFL30574749 Contents F1*20TD1~9 / F1*22TD1~9/F1*56*D/WD-*690TDK SpecificationFeatures Features & Technical ExplanationDetermine Washing Time by Fuzzy Logic Water Level ControlDoor can not be Opened Drawer Door Lower cover Adjustable FeetPower Plug Parts IdentificationOpen the box and check appliance condition InstallationInstallation Check the conditions of installation areaUse spanner to remove transit bolts Confirm the distance between the appliance and the wallTap connection and hose connection must be parallel Connect Drain Hose Connect power plugStep Check the horizontality with a level GageTest operation Wash program selector Start/Pause button Tub CleanOperation OptionWater temperature selector Load Test ModeTime Delay & Beep ON/OFF Power buttonOption button Start/Pause buttonIntensive Rinse Spin Button Motor ChartPCB Layout Program Chart HOW to Know the Water Level Frequency TroubleshootingBefore Performing Service Load Test ModeError Symptom Cause Error DisplayWater Inlet Error IE Troubleshooting with ErrorUnbalanced Error UE How to disassemble and clean pump filter Water Outlet Error OEBind Drawer continuously? Over Flow Error FEPressure Sensor S/W Error PE Does the Door Switch operate as follows? Door Open Error dEMIN STD MAX Thermistor Heating Error tEMotor Locked Error LE Assemble the Hall Sensor Disassemble the Hall SensorNo Power Troubleshooting Without Error CodesVibration & Noise In Spin Detergent & Softener does not flow Water Leak from Dispenser Water LeakUnknown Water on Floor Control Panel Disassembly InstructionsDispenser Assembly Dispenser AssemblyLower Cover Door Inlet ValveGasket Assembly Common Rotor ASSEMBLY, Stator ASSEMBLY, Friction Damper AssemblyHeater PumpWhen Foreign Material is Stuck Between Drum and TUB Switch ASSEMBLY, Door LockExploded View Exploded View of Control Panel & Dispenser Assembly Exploded View of Drum & TUB Assembly