Whirlpool W10044800 installation instructions Straight power cord Looped power cord

Page 5

Straight power cord

Looped power cord

Straight power cord

1.Remove power plug and yellow strap from machine base to release the rear leveling system.

2.Firmly grasp the power cord and pull to completely remove the power cord, cord restraint, and pin from the rear panel.

3.Confirm that the power cord restraint (A), and pin (B) are removed.

Looped power cord

1.Firmly grasp the yellow shipping strap and pull until both ends are completely removed from washer.

2.Check that two (2) cotter pins were removed with the shipping strap.

A. Power cord restraint

B. Pin

4.To remove the power cord from the cord restraint, push the power cord in, press TAB, and then pull the power cord out.

Image 5

Contents Washer Safety Washer Installation InstructionsTools andParts Installation RequirementsParts supplied Alternate PartsYou will need LocationRequirementsDrainSystem ElectricalRequirements Installation InstructionsBeforeYouStart For a grounded, cord-connected washerStraight power cord Looped power cord ConnectDrainHose Connecting the drain hose form to the corrugated drain hoseConnecttheInletHoses To keep drain water from going back into the washerSecuretheDrain Hose Install the Front Leveling FeetLevel theWasher Check for leaksSlide the washer to its final location CompleteInstallationSteps in Final Location Requisitos DE Instalación Seguridad DE LA LavadoraHerramientas ypiezas Piezas proporcionadasSistemadedesagüe Requisitos deubicaciónPiezas alternativas Usted necesitaráSistema de desagüe en un lavadero vista C Requisitos eléctricosSistema de desagüe en el piso vista D Para una lavadora conectada a tierra con cable eléctricoAntes deempezar Instrucciones DE InstalaciónCómo quitar el material detransporte Cable de suministro de energía derechoCómo evitar que el agua del desagüe regrese a la lavadora Cómoconectarla mangueradedesagüeConectelasmanguerasdeentrada Limpie las tuberías del agua Asegurela mangueradedesagüeRevise si hay pérdidas de agua Conecte las mangueras de entrada a la lavadoraInstale las patas niveladoras delanteras NivelelalavadoraPasos en la ubicación final Deslice la lavadora hasta su ubicación finalCompletelainstalación Sécurité DE LA LaveuseOutillageetpièces Exigences D’INSTALLATIONPièces fournies Pièces fournies Autres piècesIl vous faudra Exigences d’emplacementSystèmedevidange Spécificationsélectriques Instructions D’INSTALLATIONAvantdecommencer Retraitdu matérieldexpéditionCordon dalimentation droit Pour retirer le cordon dalimentation du dispositifLe sortir Cordon dalimentation en boucleRaccordementdes tuyauxd’arrivéed’eau Raccordementdu tuyaudevidangePour empêcher l’eau de vidange de refluer dans la laveuse Purger les canalisations d’eauRaccorder les tuyaux d’arrivée d’eau à la laveuse Immobilisationdu tuyau devidangeInspection-recherche des fuites Réglagedel’aplomb delalaveuse Acheverl’installation