USING YOUR WASHER
First wash cycle without laundry
Before washing clothes for the first time, if not completed during the final installation step, choose the QUICK cycle and run it without clothes. Use only HE detergent. Use 1/2 the manufacturer’s recommended amount for a
1. Sort and prepare your laundry
Sort items by recommended cycle, water temperature, and colorfastness. Separate heavily soiled items from lightly soiled. Separate delicate items from sturdy fabrics. Treat stains promptly and check for colorfastness by testing stain remover products on an inside seam.
IMPORTANT:
nEmpty pockets. Loose change, buttons, or any small object can plug pumps and may require a service call.
nClose zippers, fasten hooks, tie strings and sashes, and remove
nMend rips and tears to avoid further damage to items during washing.
nTurn knits inside out to prevent pilling. Separate
nDo not dry garments if stains remain after washing, because heat can set stains into fabric.
nAlways read and follow fabric care labels and laundry product instructions. Improper usage may cause damage to your garments.
2. Add laundry products (if desired)
NOTE: Do not add clothes to washer drum prior to adding laundry products. Always follow manufacturer’s instructions.
3. Load laundry into washer
Place a load of sorted clothes loosely in the washer. Items need to move freely for best cleaning and to reduce wrinkling and tangling. Close the washer door by pushing it firmly until the latch clicks.
n Depending on load type and cycle, the washer can be fully loaded, but not tightly packed. Washer door should close easily. See “Cycle Guide” for loading suggestions.
n Mix large and small items and avoid washing single items. Load evenly.
n Wash small items in mesh garment bags. For multiple items, use more than one bag and fill bags equally.
7