Electrolux 63742 VI manual Washing drum, Door seal

Page 28

28Care and cleaning

2.To aid cleaning, the top part of the additive compartment should be removed.

3. Flush it out under a tap, to remove any traces of accumulated powder.

4. Having removed the drawer, use a small brush to clean the recess, ensuring that all washing powder residue is removed from the upper and lower part of the recess.

5.Replace the drawer and run the rinse programme without any clothes in the drum.

6.Having removed the drawer, use a small

brush to clean the recess, ensuring that all washing powder residue is removed from the upper and lower part of the recess.

7.Replace the drawer and run the rinse programme without any clothes in the drum.

Washing drum

Rust deposits in the drum may occur due to rusting foreign bodies in the washing or tap water containing iron.

Important! Do not clean the drum with acidic descaling agents, scouring agents containing chlorine or iron or steel wool.

1.Remove any rust deposits on the drum with a cleaning agent for stainless steel.

2.Run a washing cycle without any laundry to clean off any cleaning agent residues. Programme: COTTONS 95° or 90°C, press the button 6, add approx. 1/2 measuring cup of detergent.

Door seal

Check the door seal from time to time and remove any objects that could be trapped in the fold.

Image 28
Contents Lavamat 63742 Dear Customer Contents What to do if Technical Data Consumption value Installation Packaging materials Old machine Ecological hintsPrior to using for the first time Safety informationGeneral safety Installation Child Safety UseProduct description Compartment for prewash phase or stain removerDetergent dispenser drawer Table of symbols Control panelChild safety lock 10.1 10.2 Acoustic signals Child safety lockFirst Use PersonalisationDaily Use Load the laundryMeasure out the detergent and the fabric softener Pull out the dispenser drawer until itMachine is now switched on Programme option button Select the Prewash option ButtonSelect the Stain option Button Select the Sensitive option ButtonSelect the Time option Button Select the Delay Start ButtonSelect the START/PAUSE Button Altering an option or a running programme Select an additional rinseInterrupting a programme Cancelling a programme Opening the door after the programme has startedAt the end of the programme 10.2 go off and a blinking 0 will appear on the displayNon-shrink shirts Washing programmesBlouses Spin Programme information Temperatures Preparing the wash cycleSorting out the laundry Before loading the laundryFollowing weights are indicative Laundry weightsMaximum loads Removing stains Detergents and additivesQuantity of detergent to be used Degrees of water hardnessPowder detergents for delicate fabrics 60C max and woollens Marked before starting the wash programmeCare and cleaning Washing drum Door sealDrain pump Water inlet filter Emergency emptying outFrost precautions Possible cause/Solution What to do ifMachine fills then empties immediately Cause possible/Solution Technical Data Consumption valueUnpacking InstallationPolystyrene base from the bottom Six smaller bolts C Positioning and levelling Water inletWater-stop device Water drainageOnto a sink outlet spigot Interest of the environment Electrical connectionWith the following code Green and Yellow Earth BluePermanent connection Preparation and assembly of the door Building-inMounting the door Hardwood strip Environment concerns Packaging materialsOld machine Ecological hintsPage 132 963 770-01-302008 Subject to change without notice