Use 15
Select the required programme by means of programme selector dial (1)
The machine is now switched on.
You can choose the right programme for any type of laundry following the descriptions on the washing programme tables (see «Washing Programmes»).
Turn the programme selector dial to the required programme. The programme selector determines the type of washing cycle (e.g. water level, drum movement, number of rinses) and the washing temperature according to the type of laundry.
The pilot light of button 8 starts blinking and the display shows the duration of the selected programme.
The selector dial can be turned either clockwise or anticlockwise. Turn to position O to Reset programme/Switch OFF of the machine.
At the end of the programme the selector dial must be turned to position O, to switch the machine off.
For the description of each washing programmes of the selector dial, see the chapter «Washing programmes».
Attention!
If you turn the programme selector dial to another programme when the machine is working, the yellow pilot light of button the 8 will blink 3 times and the message Err is displayed to indicate a wrong selection. The machine will not perform the new selected programme.
Select the SPIN speed reduction or the RINSE HOLD option (Button 2)
When the required programme has been selected, your appliance automatically proposes the maximum spin speed provided for that programme.
Press the button 2 repeatedly to change the spin speed, if you want your laundry to be spun at a speed different from the one proposed by the washing machine.
The relevant light will light up.
RINSE HOLD: by selecting this option the water of the last rinse is not emptied out to prevent the fabrics from creasing. When the programme has finished the display shows a blinking 0, the pilot light 10.2 remains lit, the pilot light of button 8 and the pilot light 10.1 are off and the door is locked to indicate that the water must be emptied out.
To empty the water out please read chapter «At the end of the programme».