Electrolux 63742 VI Interest of the environment, Electrical connection, With the following code

Page 41

Installation 41

In the interest of the environment

Washing machines should be connect- ed to the FOUL drainage system, the water will then be taken to a sewage works for treatment before being dis- charged safely into a river.

It is essential that these appliances are not connected to the surface water drainage system as this water is dis- charged directly into a river or stream and may cause pollution.

If you require any further advice please contact your local water authority.

Electrical connection

WARNING: THIS APPLIANCE MUST BE EARTHED.

SHOWER

SINK TOILET

BATHBIDET

WASHING

MACHINE DISHWASHER

RAINWATER

'RUN-OFF'

		FOUL DRAIN
	SURFACE WATER	FOUL SEWERS
	SURFACE WATER
	DRAINS & SEWERS	SEWAGE
		SEWAGE
	UNTREATED	TREATMENT
	UNTREATED	WORKS
	DISCHARGE	WORKS
	DISCHARGE	TREATED
		TREATED
		DISCHARGE
	RIVER	RIVER

The manufacturer does not accept any responsibility for damage or injury through failure to comply with the above safety precaution.

If the plug that is fitted to your appliance is not suitable for your socket outlet, it must be cut off and the appropriate plug fitted.

Remove the fuse from the cut off plug.

The cut off plug should then be disposed of to prevent the hazard of shocks in case it should be plugged into a 13 Amp socket in another part of your home.

Important
The wires in the mains lead are coloured in accordance
with the following code:	GREEN &YELLOW 13AMP FUSE

Green and Yellow	- Earth
Blue	- Neutral
Brown	- Live

13 AMP

BLUE

BROWN

CORD CLAMP

Image 41

Contents Lavamat 63742 Dear Customer Contents What to do if Technical Data Consumption value Packaging materials Old machine Ecological hints InstallationGeneral safety Safety informationPrior to using for the first time Installation Use Child SafetyDetergent dispenser drawer Compartment for prewash phase or stain removerProduct description Control panel Table of symbolsChild safety lock 10.1 10.2 Child safety lock Acoustic signalsFirst Use PersonalisationLoad the laundry Daily UseMeasure out the detergent and the fabric softener Pull out the dispenser drawer until itMachine is now switched on Select the Prewash option Button Programme option buttonSelect the Stain option Button Select the Sensitive option ButtonSelect the START/PAUSE Button Select the Delay Start ButtonSelect the Time option Button Interrupting a programme Select an additional rinseAltering an option or a running programme Opening the door after the programme has started Cancelling a programmeAt the end of the programme 10.2 go off and a blinking 0 will appear on the displayBlouses Washing programmesNon-shrink shirts Spin Programme information Preparing the wash cycle TemperaturesSorting out the laundry Before loading the laundryMaximum loads Laundry weightsFollowing weights are indicative Detergents and additives Removing stainsDegrees of water hardness Quantity of detergent to be usedPowder detergents for delicate fabrics 60C max and woollens Marked before starting the wash programmeCare and cleaning Door seal Washing drumDrain pump Emergency emptying out Water inlet filterFrost precautions What to do if Possible cause/SolutionMachine fills then empties immediately Cause possible/Solution Consumption value Technical DataPolystyrene base from the bottom InstallationUnpacking Six smaller bolts C Water inlet Positioning and levellingWater drainage Water-stop deviceOnto a sink outlet spigot Electrical connection Interest of the environmentWith the following code Green and Yellow Earth BluePermanent connection Building-in Preparation and assembly of the doorMounting the door Hardwood strip Packaging materials Environment concernsOld machine Ecological hintsPage 132 963 770-01-302008 Subject to change without notice