Electrolux 63742 VI manual Installation, Unpacking, Polystyrene base from the bottom

Page 36

36Installation

Installation

Unpacking

All transit bolts and packing must be removed before using the appliance.

You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again.

1.After removing all the packaging, carefully lay machine on it’s back to remove the

polystyrene base from the bottom.

HEC0008

2.Remove the power supply cable and the draining hose from the hose holders on the rear of the appliance.

3.With the supplied spanner unscrew and remove the central rear bolt A.

A

Image 36

Contents Lavamat 63742 Dear Customer Contents What to do if Technical Data Consumption value Installation Packaging materials Old machine Ecological hintsSafety information Prior to using for the first timeGeneral safety Installation Child Safety UseCompartment for prewash phase or stain remover Product descriptionDetergent dispenser drawer Table of symbols Control panelChild safety lock 10.1 10.2 Acoustic signals Child safety lockFirst Use PersonalisationDaily Use Load the laundryMeasure out the detergent and the fabric softener Pull out the dispenser drawer until itMachine is now switched on Programme option button Select the Prewash option ButtonSelect the Stain option Button Select the Sensitive option ButtonSelect the Delay Start Button Select the Time option ButtonSelect the START/PAUSE Button Select an additional rinse Altering an option or a running programmeInterrupting a programme Cancelling a programme Opening the door after the programme has startedAt the end of the programme 10.2 go off and a blinking 0 will appear on the displayWashing programmes Non-shrink shirtsBlouses Spin Programme information Temperatures Preparing the wash cycleSorting out the laundry Before loading the laundryLaundry weights Following weights are indicativeMaximum loads Removing stains Detergents and additivesQuantity of detergent to be used Degrees of water hardnessPowder detergents for delicate fabrics 60C max and woollens Marked before starting the wash programmeCare and cleaning Washing drum Door sealDrain pump Water inlet filter Emergency emptying outFrost precautions Possible cause/Solution What to do if Machine fills then empties immediately Cause possible/Solution Technical Data Consumption valueInstallation UnpackingPolystyrene base from the bottom Six smaller bolts C Positioning and levelling Water inletWater-stop device Water drainageOnto a sink outlet spigot Interest of the environment Electrical connectionWith the following code Green and Yellow Earth BluePermanent connection Preparation and assembly of the door Building-inMounting the door Hardwood strip Environment concerns Packaging materialsOld machine Ecological hintsPage 132 963 770-01-302008 Subject to change without notice