Care and cleaning 29
Drain pump
The pump should be inspected regularly and particularly if
•the machine does not empty and/or spin
•the machine makes an unusual noise during draining due to objects such as safety pins, coins etc. blocking the pump.
Proceed as follows:
1.Disconnect the appliance.
2.If necessary wait until the water has cooled down.
3.Place a container close to the pump (A) to collect any spillage.
4.Release the emergency emptying hose (B), place it in the container and remove its cap.
5.When no more water comes out, unscrew the pump cover and remove it. Always keep a rag nearby to dry up spillage of water when removing the pump.
6.Remove any objects from the pump impeller by rotating it.
7.Replace the cap on the emergency emptying hose and place the latter back in its seat.
8.Screw the pump cover fully in.
Warning!
When the appliance is in use and depending on the programme selected there can be hot water in the pump. Never remove the pump cover during a wash cycle, always wait until the appliance has finished the cycle, and is empty. When
A 
B