Maytag MD98 warranty Setting AIR Fluff, Air fluff tumbles the load with room temperature air

	Press "Start/Pause" or			Press "Start/Pause" or
	change your selection below.			change your	selections below.
	Temperature				options
				time	cycle chime loud
	time dry	medium cycle	chime
45					remind chime ON
	minutes	medium		45 minutes
	regular
	regulardelicate	extra low		regular
	temperature			temperature

Step 3

Select the temperature. Choose the appropriate temperature for drying the load. See page 6 for a detailed description of these temperatures.

Step 4

Review Screen – The Review Screen lists the selected settings. At this point you may press Start/Pause to begin drying the load or select “options” for further customization of the drying cycle.

Options	Press "Start/Pause" or
	change your selections below.
		options
loud end	time dry	cycle chime loud
		remind chime OFF
of cycle chime	45 minutes
continue	regular
	temperature

Step 5

Options Screen – The option choices on the left turn the options on or off. The option choices on the right show an additional screen with multiple choices. The following options may be added to customize your “time dry” cycle:

•“wrinkle prevent”

•“damp dry chime”

•“remind chime”

•“end of cycle chime”

See page 7 for a detailed description of these options. When the desired selections are made, touch “continue” to see the review screen once again.

Step 6

Review Screen – The review screen will appear once again to verify your selections. If they are correct, press Start/Pause. If they are incorrect, press the area you would like to change.

Special Note: As you use the touchscreen, if you feel you are lost, press Back or Home.

SETTING AIR FLUFF

“air fluff” tumbles the load with room temperature air.

	Home	Press "Start/Pause" or
		change your selection below.
sensor dry			options
			medium cycle chime
			remind chime ON
time dry	air fluff	air fluff
	(no heat)	20 minutes

more cycles

favorites

Step 1

Select “air fluff” from the Home screen.

Step 2

Use the up or down arrow to select the tumble time. Select “options” if desired to select options for the load. The review screen will appear once again to verify your selections. If they are correct, press Start/Pause.

8