Schneider Electric PM5300 manual Energy Values, Demand Values, Other Measurements, Data Recording

PowerLogic™ PM5300 series user guide Chapter 3—Hardware Reference

Frequency	
Real, reactive, and apparent power (Total and per phase)	Signed, Four Quadrant
True Power Factor (Total and per phase)	Signed, Four Quadrant
Displacement PF (Total and per phase)	Signed, Four Quadrant
% Unbalanced I, V L-N, V L-L	

Energy Values*

Accumulated Active, Reactive and Apparent Energy

Received/Delivered; Net and absolute

Demand Values*

Current average	Present, Last, Predicted, Peak, and Peak
	Date Time
Active power	Present, Last, Predicted, Peak, and Peak
	Date Time
Reactive power	Present, Last, Predicted, Peak, and Peak
	Date Time
Apparent power	Present, Last, Predicted, Peak, and Peak
	Date Time
Demand calculation (Sliding, fixed and rolling block, thermal	
methods)
Synchronization of the measurement window to input,	
communication command or internal clock
Settable Demand intervals	

Other Measurements*

I/O timer

Operating timer

Load timer

Alarm counters and alarm logs

Power Quality Measurements









THD, thd (Total Harmonic Distortion) I, V L-N, V L-L per phase	I, V L-N, V L-L
TDD (Total Demand Distortion)	
Individual harmonics (odds)	31st
Data Recording
Min/max of instantaneous values, plus phase identification*	
Alarms with 1s timestamping*	
	Up to two fixed parameters (e.g., kWh and
Data logging	kVAh) with configurable interval and duration
	(e.g., 2 parameters for 60 days at 15 minutes
	interval)
Memory capacity	256 kB
Min/max log	
Maintenance, alarm and event logs	

Inputs/Outputs/Relays

Digital inputs Digital outputs Form A Relay outputs

Timestamp resolution in seconds

Whetting voltage

2

2

2

1



NOTE: *Stored in non-volatile memory

14 © 2014 Schneider Electric All Rights Reserved