Schneider Electric PM5300 manual Navigate to I/O configuration Energy Pulsing

PowerLogic™ PM5300 series user guide Chapter 6—Input / Output

Configuring the LED or digital output for energy pulsing using

ION Setup

You can use the ION Setup to configure your meter’s LED or digital output for energy pulsing.

1.Start ION Setup.

2.Connect to your meter

3.Navigate to I/O configuration > Energy Pulsing.

4.Select the LED or a digital output to configure and click Edit. The setup screen is displayed.

5.Enter a descriptive name for the digital output’s Label.

6.Configure the other setup parameters as required.

7.Click Send to save your changes.

Alarm / energy pulsing LED setup parameters available through ION Setup

Parameter	Values	Description
		Off disables the LED.
Mode	Off, Alarm, Energy	Alarm sets the LED for alarm notification.
		Energy sets the LED for energy pulsing.
		When configured for energy pulsing, this
Pulse Wt. (p/k_h)	1 to 9999999	defines how many pulses are sent to the LED
		for every 1 kWh, 1 kVARh or 1kVAh of
		accumulated energy.
	Active Energy Delivered
	Active Energy Received
	Active Energy Del+Rec
	Reactive Energy Delivered	Select which accumulated energy channel to
Channel	Reactive Energy Received
		monitor and use for energy pulsing.
	Reactive Energy Del+Rec
	Apparent Energy Delivered
	Apparent Energy Received
	Apparent Energy Del+Rec

Related topics

•See “Alarm Priorities” on page 66 for a detailed description on the alarm / energy pulsing LED’s behavior when it is configured for alarm notification.

Configuring the alarm / energy pulsing LED using the front panel

You can use the front panel display to configure your meter’s LED for alarming or energy pulsing application.

Alarm / energy pulsing LED settings menu tree

Maint

Reset

Setup

Meter

Comm

Alarm

I/O

HMI

Clock

LED

SIn

D Out Relay

1.Navigate to Maint > Setup.

2.Enter the setup password (default is “0”), then press OK.

3.Navigate to I/O > LED.

© 2014 Schneider Electric All Rights Reserved 61