Schneider Electric E4800 manual Pulse Inputs, Display Navigation, Normal Mode, Diagnostics Mode

Page 37

930-110-01-B.00

 

PowerLogicTM EM4800 Series

04/2011

 

Installation

 

 

 

 

 

b. If the IP address is not 169.254.0.10, the meter has acquired an

 

 

IP address from the local network, and will be able to report data

 

 

and synchronize time.

 

3.

Press the Display button until the “Send” command appears on the

 

 

display.

 

4.

Press the left or right arrow button to manually force the PowerLogic

 

 

EM4800 meter to report metering data using the Ethernet or modem

 

 

connection. This clears data from the PowerLogic EM4800 meter

 

 

memory, and ensures the time is set correctly.

Pulse Inputs

There are two pulse in terminal blocks in the PowerLogic meter, as shown in

 

Figure 15. Each terminal block has a negative terminal pin on the right and a

 

positive terminal pin on the left. The pulse inputs are compatible with both dry

 

and solid-state form A contacts, 10 Hz (maximum), 20 ms pulse width

 

(minimum). The inputs are not polarity-sensitive to dry relay contacts. When

 

the pulsing device provides solid-state form A outputs, the negative terminal

 

from the source device must be connected to the negative terminal of the

 

PowerLogic meter pulse in terminal block.

Display Navigation

The PowerLogic EM4800 meter has three buttons to control the information

 

presented on the LCD. The display has a normal and a diagnostics mode.

 

The PowerLogic EM4800 meter starts in normal mode, and enters

 

diagnostics mode when the Display button is pressed and held for 5 seconds.

 

To adjust the contrast, hold down the Display button, and use the right and

 

left arrow buttons to increase and decrease the contrast respectively.

 

Normal Mode

 

In Normal mode, the Display button scrolls through the information for each

 

meter. The left and right arrow buttons select the previous or next meter

 

points respectively. The following information is available:

 

•

Real Energy Delivered kWh D

 

•

Real Energy Received kWh R

 

•

Real Power Watts

 

•

Reactive Energy Delivered KVarhD

 

•

Reactive Energy Received KVarhR

 

•

Reactive Power Var

 

In Normal mode, the right and left arrow buttons scroll the display from meter

 

points 1 to 8, 1 to 12, or 1 to 24, depending on your configuration.

 

Diagnostics Mode

 

Diagnostics mode is accessed by pressing and holding the Display button for

 

5 seconds. In Diagnostics mode, pressing the Display button will scroll

 

through the following additional information:

 

•

Send data command

 

•

CT Primary value and Real Power Watts per phase

 

•

Voltage per phase

 

•

Local IP address

 

•

Reset factory default IP address command

 

•

Date and time (UTC)

© 201 Schneider Electric All Rights Reserved

31

Page 36 Page 38
Image 37
Page 36 Page 38
Contents PowerLogicTM Series EM4800 Digital apparatus complies with Canadian ICES-003 ProcedureIndustry Canada Class B Emission Compliance Statement  Schneider Electric All Rights Reserved Table of Contents Page Introduction PowerLogic EM4800 series System SpecificationsEnvironmental PowerLogic EM4800 series meter specificationsEM4800 Front Panel DisplayPowerLogic EM4833 and PowerLogic EM4880 internal view PowerLogic EM4805 internal view Injury Safety PrecautionsElectrical Standards Compliance Pre-Installation Checklist InstallationReceiving Site Planning Access to Power and LightingMounting the PowerLogic EM4800 meter 10.2 cm 04/2011 Installation Shorting block detail 930-110-01-B.00 Wiring diagrams Power is offElectrical personnel Inside equipmentFor a single-phase panel with the 120V variant of the meter 201 Schneider Electric All Rights Reserved 930-110-01-B.00 201 Schneider Electric All Rights Reserved 930-110-01-B.00 Phase B CT is optional Delta service meteringInstalling the Current Transformers Source Installing 5A Converters and CTs on the PowerLogic EM4880 Shows a 5A CT connected to the converter PowerLogic EM4880 5A CT connection to converter X1 CT X2 CT Connect the two wiring harnesses to the PowerLogic EM4805 Installing the 5A CTs on the PowerLogic EM4805Remove the shorting block jumper Repeat steps 5 to 7 for remaining CTsPowerLogic EM4805 CT color pair identification Connecting the Phone Line Connecting the CommunicationsConnecting the Ethernet Cable Manually Testing CommunicationsDiagnostics Mode Normal ModePulse Inputs Display NavigationRecording the Meter Map Remote DisplayInstallation Record sample shown Maintenance Regulatory Compliance Shows the graphical symbols that appear on the equipment Graphical symbolsGraphical symbols that appear on equipment Index PowerLogicTM EM4800 Series 930-110-01-B.00 Index 04/2011 User Notes Page 930-110-01-B.00 04/2011
Related manuals
Manual 30 pages 57.56 Kb

E4800 specifications

Schneider Electric's E4800 is a robust solution designed for comprehensive energy management, combining advanced features, innovative technologies, and user-friendly characteristics that cater to the needs of various industries. This device primarily focuses on enhancing efficiency in energy consumption and optimizing operational performance.

One of the standout features of the E4800 is its ability to monitor and manage energy consumption in real-time. This capability allows businesses to identify energy usage patterns, track costs, and gain insights into where energy can be saved. The real-time data analysis supports decision-making, enabling organizations to implement energy-saving strategies effectively.

The E4800 is equipped with an intuitive user interface that simplifies navigation and data interpretation. Users can access detailed analytics and reporting tools that provide visibility into energy performance metrics. This user-friendly aspect ensures that both technical and non-technical staff can utilize the system, fostering a culture of energy efficiency across the organization.

Additionally, Schneider Electric has integrated advanced communication technologies into the E4800. It supports various communication protocols such as Modbus, BACnet, and Ethernet, enabling seamless integration with existing systems and infrastructure. This versatility ensures that organizations can leverage their current investments in technology while upgrading to more advanced energy management solutions.

The E4800 is also designed with scalability in mind. Organizations can easily expand their energy management capabilities as their needs grow. Whether managing a single facility or a multi-site operation, the E4800 can adapt to varying requirements without significant overhauls or disruptions.

Another noteworthy characteristic is its compliance with global standards for energy management and sustainability. By utilizing the E4800, companies can demonstrate their commitment to environmental responsibility and adherence to regulations, which is increasingly important in today’s business landscape.

Lastly, Schneider Electric's E4800 comes with robust support services, ensuring that users can access assistance whenever needed. This commitment to customer service solidifies its position as a reliable solution for energy management.

In summary, Schneider Electric's E4800 offers a comprehensive suite of features designed for effective energy management, leveraging real-time analytics, versatile communication technologies, scalability, compliance with global standards, and excellent customer support, making it an ideal choice for businesses aiming to enhance their energy efficiency and sustainability.
Top Page Image Contents