PowerLogicTM EM4800 Series |
|
|
Installation |
| 04/2011 |
|
| |
| In Diagnostics mode, the right and left arrow buttons scroll the display from | |
| meter 1 to 8, 1 to 12, or 1 to 24, depending on your configuration. When the | |
| local IP address is shown on the LCD, use the right and left arrow buttons to | |
| scroll through the following information: | |
| • | Remote host server IP address |
| • | Time server IP address |
| • | Default IP address |
| • | Default NetMask |
| • | Default gateway |
| • | PPP user name |
| • | Phone number |
| • | AT command string |
| • | Alternate phone number |
| • | Unit serial number |
| • | Firmware build number |
| • | Ethernet port MAC address |
| • | Firmware revision |
| • | Potential transformer ratio |
Remote Display | For installation and operating instructions for the EM4800 Remote Display | |
| (part number METSxEM48RD), refer to the "PowerLogic Remote Display Kit | |
| for EM4800 Meters" technical document. | |
Recording the Meter Map | The final step in the installation process is to complete the Installation | |
| Record, and record the mapping of the meters to the wired points. A copy of |
Figure 16, which is organised to resemble a breaker panel, is provided with each PowerLogic EM4800 meter, and is to be completed and delivered to your system administrator.
32 | © 201 Schneider Electric All Rights Reserved |